Episode
Episode® 250 Commercial Series In-Ceiling 25/70-Volt Two-Way Speaker with 6 1/2 in. Woofer (Each)

Additional Photos (click to enlarge):

Episode® 250 Commercial Series In-Ceiling 25/70-Volt Two-Way Speaker with 6 1/2 in. Woofer (Each)

Item#: ECS-250-IC-6

Status: Log-in for Availability

Episode® 250 Commercial Series In-Ceiling 25/70-Volt Two-Way Speaker with 6 1/2 in. Woofer (Each)

If your next commercial job calls for performance, looks and value – this Episode® 250 Commercial Series In-Ceiling 25/70-Volt Speaker is dressed to impress. Its true two-way design delivers stellar performance for background music and paging applications, while a micro-perf aluminum grill provides a contemporary fit and finish.

Wide Dispersion Soundfield
With a dispersion angle of 110 degrees, this speaker effectively reduces hot spotting for a more uniform distribution. This provides greater flexibility in speaker spacing, since you need fewer speakers to cover the same amount of square footage.
 
Fast Installation

Equipped with flying leads for 0.5W, 1W, 2W, and 4W tap settings, the output level of each speaker can easily be set to meet your application’s requirements. Best of all it’s a breeze to install – just connect the appropriate wire using the included wire nuts, zip in the dog toggles, and you’re ready to go.

Trying to figure out how many speakers can be connected to an amplifier of volume control? Check out this calculator >>

 
Two-Way Design
A two-way design delivers better sound quality than a single full-range driver, making these speakers a step up from traditional “hubcap” speakers. The Nomex spider and high temperature voice coil assure a long-lasting product, and the fluid-cooled neodymium tweeter magnet delivers smooth, high-frequency performance.
 
Completely Cardboard Packaging
There’s no bulky Styrofoam cluttering up this packaging (and your worksite) – it’s all cardboard inside and out. Both the grill and speaker come in the box, smartly folded to keep each part protected.
 
Fully Paintable
Use the included paint mask to easily paint the baffle and grille to match any custom color your commercial installation may require.

Still have a question?? Email us at support@snapav.com

Specifications
Woofer: 6½" Treated Paper Cone, Nomex Spider & High Temp Voice Coil
Tweeter: 1/2" Fabric Dome, Neodymium Motor, Ferrofluid Cooled
Power Handling: 50 Watts RMS, 125 Watt Peak
Dispersion Angle: 110 degrees
Transformer Tap Settings: 0.5W, 1W, 2W, 4W
Frequency Response
(-6dB):
58Hz - 20KHz
Sensitivity -2.83 V / 1 Meter: 87
Adjustments: N/A
Color: White
Crossover Frequency: 4.3 kHz
Connector Type: Flying Leads
Weight: 2.1 lbs. each
Grill Type: Aluminum Micro-Perf Mesh
Cutout Dimensions: 7.7" diameter
Mounting Depth: 3.4"
Finished Dimensions: 8.5" diameter, 3" D
Sold As: Each



Frequency Response

The frequency response curve shows the Sound Pressure Level (SPL) at a 1 meter (3.28 feet) distance from the speaker at all frequencies (Freq) in the audible range 20 HZ - 20,000 Hz (20K). It is an indication of how evenly the speaker reproduces the sound from the lowest bass to the highest treble.


Warranty
Lifetime Limited Warranty
All Episode Speaker Products have a Lifetime Limited Warranty.  This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use.  This warranty shall not apply to products which have been abused, modified or disassembled.  Products to be repaired under this warranty must be returned to SnapAV or a designated service center with prior notification and an assigned return authorization number (RA).