RS-232: The
included RS-232 port is perfect for integrating the screen into popular control systems like RTI, Control4, ELAN g! or ELAN SS1. Did we mention we've written drivers for these already? Download these files and protocol documentation
here.
IR: The
included case-mounted IR receiver means you can mount the screen and start controlling it right of the box with the included IR remote control. Should you choose to hide the casing completely behind a curtain, soffit or in the ceiling itself, an off-board IR receiver is
included to let you simply plug in and place at a discrete location. Simple!
12V Trigger: If you're using a projector or AV receiver with a 12V output, use the
included 30’ cable to easily have the screen raise and lower when that device is turned on. When the installation prohibits using a wired solution, you can go wire-free with our
DFM-RF-TRIG-12V (for use with projectors that have a 12V trigger) or
DFM-RF-TRIG-110V (for use with projectors that do not have a 12V trigger output).
Keypad: Use the
included wall switch and cable for quick and easy connection. Alternatively you can also add an additional momentary contact switch to control the screen from two locations.
