|
Episode® Electronics Surface Mount IR Sensor with LED Feedback (36kHz - 60 kHz) Black
All Episode IR sensors are plasma-proof for installation near flat panel displays and under virtually all lighting conditions.
Advanced IR Filtering Technology
The IR-SM-3660 features advanced, IR Filtering Technology that reduces Infrared Interference (IRI), Compact Fluorescent Lamp (CFL), Electro-Magnetic Interference (EMI), and Electrostatic Interference (ESI) noise sources in addition to blocking plasma TV, Sunlight and LCD emissions. You are now ready for entertainment ease with your new IR repeating system.
Universal compatibility
The IR-SM-3660 works with virtually all A/V components and remote controls. This includes new set-top boxes from Scientific Atlanta and Motorola.
Small size for easy placement
At under 2" long and 1/2" wide the IR-SM-3660 IR sensor is small enough to install almost anywhere. Its solid dark gray appearance is intended to "hide" in plain sight.
Adhesive backed
The small, light-weight IR-SM-3660 can fit almost anywhere and the strong adhesive backing allows it to stay put.
3 Year Warranty
The Episode IR-SM-3660's durable design will provide years of trouble free operation.
Specifications:
1/2" x 2" x 1/2"
1/8" Plug with 3-Conductor
6 ft. of Cable
Comparable Products:
Niles MS200, Russound 850P Phantom, Xantech Dinky Link
For the installation manual Click Here.
|
| Still have a question?? Email us at support@snapav.com |
3-Year Limited Warranty
Episode® IR Products have a 3-Year Limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products which have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to SnapAV or a designated service center with prior notification and an assigned return authorization number (RA).
|
Troubleshooting Guide - IR Flashers
Problem: Cable box responds erratically or skips channels. Cable box remote works only when close to IR receiver. Extra delay between channel or volume changes.
|
SnapAV
Products Affected:
|
RSM-3660
IR1x4
IRF-1
IRF-2
PS-12DC-1A |
Solution: SnapAV flashers are very strong and the output signal that may be overpowering some components.
Place the flasher on a nearby surface. Under a shelf or on the opposite door if in a cabinet or closet. Masking tape can be used under the flasher to help minimize the effect. Depending on the component a piece of electrical tape with a pinhole will also work well.
This same symptom may be also caused by a “Double flash”. A IR receiver is triggered by the same signal a millisecond apart. This is mostly caused by the flasher of a nearby component or a reflection off a light colored surface. This will confuse some component IR receivers and cause them to temporarily “freeze” or lock up.
This can be remedied by using the flasher cover included with the IRF-1 and IRF-2. Some components have a very large area of IR receiver that will not be covered by the IRF covers included. Black electrical Tape or a similar covering will block any stray IR.
Check the component manuals for the IR receiver locations and size.
Product Development Team – SnapAV. 12/2009 DMCM
|
