Episode
Episode® Surge Lighted Protector - 11 Outlets - 2160 Joules - 58db EMI/RFI - 15 AMP – 1800W

Additional Photos (click to enlarge):

Episode® Surge Lighted Protector - 11 Outlets - 2160 Joules - 58db EMI/RFI - 15 AMP – 1800W

Item#: PR-11-LIGHT

Status: Log-in for Availability

Episode® Lighted Surge Protector - 11 Outlets - 2160 Joules - 58db EMI/RFI - 15 AMP – 1800W

surge protector
The PR-11-LIGHT is an ideal power and surge rack unit for installations that need clean, safe power and light to see what you are doing. We intentionally packed the unit with 2160 Joules of surge protection, 58 db of noise filtration, and 11 AC outlets because our customers have told us that these features matter. Includes SnapCool™ X3MOV technology proven to be better than traditional round and rectangular Metal Oxide Varistors (MOVs) with higher temperature resistance. Compared to similarly priced models you'll notice that this model is loaded with what matters; reliability, features, and the right price.

Important Note: The replacement product for this is the WB-11-LIGHT


SnapCool™ X3MOV Technology
Technology proven to be far better than traditional round and rectangular Metal Oxide X3 MOV Listed Varistors (MOVs) with higher temperature resistance (over 4 times greater than traditional MOV technology) to dramatically reduce the fire threat present in traditional MOV technology.
(Click Here for a Brochure on SnapCool™ X3MOV)

Robust Energy Rating (2160 Joules):
Higher Surge protection Rating than comparable models. More than three times the surge protection than similar priced models.

Noise Filtration (58 db):
More noise filtration than comparable models.

Surge Protection Shutdown Feature
If the surge comes in and the MOV gets overheated, the thermo fuse will shutdown the circuit and the power will be cut off. This will guarantee that your electronics are safe. And with our Lifetime Replacement Policy, if the product sacrifices itself while protecting your connected equipment, you may request an equivalent replacement to the latest technology of that product category (see the SnapAV Surge Protector Equipment Warranty Policy for details).

Led Light Tubes
Two LED light tubes are perfectly place on the front panel to illuminate your equipment. Each light tube extends 2.5 inches and contains 5 LEDs. The design tucks away and pulls easily when needed, plus there is a switch to adjust the light intensity. How convenient is that?

More Outlets
10 rear and 1 front with 3 always on outlets gives more installation flexibility.

9 Ft. Power Cord
Ever get frustrated with similar models when the cord is too short. Not to worry with this model. This model comes with a 9 foot cord.

Clear Wire Management
Ninety degree plug, angled at 45 degrees to allow for clean wire management

Matching Front Panel Industrial Design:
Front panel industrial design matches Episode brand amplifiers for a sleek appearance when stacking or rack mounting the product.




Episode Power Products

Episode Power Products

Episode Power Products

Episode Power Products


 

 

Still have a question?? Email us at support@snapav.com

Specifications PR-11-LIGHT
POWER
Dimensions: 485mm (18.9") wide
203mm (7.9") deep
45mm (1.75") tall
Number Of Outlets 11 (10 Rear - 1 Front)
8 Switched
3 Always On
Maximum Current Rating 15A
Maximum Wattage Rating 1800 Watts
Line Voltage 120V AC 60 Hz
Peak Impulse Current (Amps) 144,000
Single Pulse Energy Dissipation (Joules) 2160
EMI / RF Noise Filtration (dB) 58
Noise Filtration Range 150KHz - 100MHz
Compliance UL + CUL
UL 1363 Listed (Relocatable Power Taps) Y
UL 1449 Listed (Transient Voltage Surge Suppressors) Y
UL 1449 Listed (AC Power Suppression Rating) 330V
Transient Response Time (ns) < 1 nanosecond
Power Cord Length (Ft) 9
Operating Temperature Normal 85 ~ 95 degrees F
Full Load 118 degrees F
Weight 6.6 lbs
Connected Equipment Guarantee Amount $25,000
Comparable Products:  Panamax 4300-PM, Monster HDP 1800 Powercenter, Tripp-Lite HT810ISOCTR

Lifetime Limited Warranty
This SnapAV® product has a Lifetime Limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products which have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to SnapAV or a designated service center with prior notification and an assigned return authorization number (RA).

Connected Equipment Guarantee
Lifetime - see SnapAV's Surge Protector Equipment Warranty Policy

Connected Equipment Guarantee Amount
$25,000