Strong
Strong™ Large Tilting Mount for 36-60 in. Flat-Panel TVs (Black)

Additional Photos (click to enlarge):

Strong™ Large Tilting Mount for 36-60 in. Flat-Panel TVs (Black)

Item#: SM-T-L

Status: Log-in for Availability

Strong™ Large Tilting Mount for 36-60 in. Flat-Panel TV's (Black)
As TV's are getting thinner and lighter, you will see maximum holding capacities decrease as a result - after all, why not? Our new Strong™ SM-F and SM-T mounts have slightly reduced weight ratings with the ultimate goal of going slimmer. But, we did not compromise on build quality to do so. Pick one up, and you will feel the beefy 2.5mm thick steel (that's right between 12 & 13 gauge) used to make them. You will also notice the post installation leveling screws, built-on lockable tabs and easy to use wall plate to help make the job that much easier.

Solid Construction
Underneath it's beautiful black powder coat of the SM-T-L mount is 2.5mm of solid steel. Flat panels are getting thinner and thinner. So should mounts holding them.

Slimmed Down

With TV's getting sexy-slim, it was time to trim some weight off our mounts. Our SM-T-L mounts are only 2-1/4" deep for an extra low profile


Strong MountsPost Install Leveling
Leveling a mount is fairly straightforward and rather simple - except when you face a unlevel mantle or just slightly sloped ceiling. We understand the pain of having to re-level an installed mount, so our SM-F mounts include post-install leveling screws for last minute adjustments.





Strong MountsLokTight™ Tabs
Most installer worries we surveyed are in regards to kids knocking the TV off the mount, while some are protecting the TV from being stolen. Our new Strong™ fixed and tilt mounts now include LokTight™ rotating lockable tabs directly on the arms themselves. The lockable tabs keep the arms against the mount, eliminate easy lifting from curious kids, and allows for a locking device to be added for security measures.



Strong MountsFriendly Wall-Plate
How so? Well, reason number one is that the center bolt hole location includes a notch so you can drill in a sheetrock screw for temporary hanging. Two, it's reversible so there is no set top or bottom, which means no confusion. Three, the wide mouth in the center allows for easy placement over a large Midi plate.





UL Listed
Strength & integrity are crucial ingredients in flat panel mounts due to how much money they are holding up. Rest assured we understand and continue to uphold our product quality by getting the most effective "guarantee-on-a-box" we can provide - UL approval.
UL Listed

We recommend purchasing a SM-RBX-WH or other in-wall accessory box when installing this product.
Still have a question?? Email us at support@snapav.com

Specifications
VESA Compliant: 200mmx200mm up to 700x500mm
Min / Max TV: 36" - 60"
Max TV Weight: 165 lbs.
Construction: 2.5mm Steel, Powder Coated Black
Tilt / Swivel / Extends: 2-1/4" Profile (Depth); 13 degree forward / 8 degree back
Hardware Included: Yes
Weight: 8.6 lbs
Comparable Products: Peerless SF/ST series
Sanus LL25
Omni 2N1-L


For the Technical Drawing  Click Here.


Warranty
Lifetime Limited Warranty
All Strong Mounts have a Lifetime Limited Warranty.  This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use.  This warranty shall not apply to products which have been abused, modified or disassembled.  Products to be repaired under this warranty must be returned to SnapAV or a designated service center with prior notification and an assigned return authorization number (RA).