Close
Have questions? Log in to access chat
Deliver warm, rich sound with the new LEA amps for outdoor and large commercial installations.
Wirepath’s expanded line includes direct burial speaker wire, Lutron-compatible wire, plenum-rated cables, and more.
Your choice is our mission: Snap One now offers Sanus and Chief mounts online.
Deliver enterprise-grade networking solutions and get 3X the Partner Rewards! *
*Terms and conditions apply.
WattBox provides three distinct ways to fix problems, reduce service calls, and prevent truck rolls. Combine WattBox’s scheduling and auto-reboot with OvrC Home and OvrC remote management, and you have a one-of-a-kind power conditioner.
Bring true 4K HDR entertainment to your customers with the latest laser light source projectors from Sony, offering crisp, vibrant HDR images, even in well-lit spaces.
New accessories and modules are available for the Control4® DS2 Door Station.
Bring world-renowned Triad sound to your architectural speaker projects with Triad PDX.
The Veranda 3 features Android TV, giving your customers access to over 700,000 movies and shows via their favorite apps.
All the installation tools you'll need to terminate Cleerline fiber cable and connectors quickly and cleanly.
Halo is Parasound’s premier line with a reputation for going head-to-head with the most expensive equipment on the market, while costing a fraction of the price. Halo has earned honors and awards that are unmatched.
Halo is Parasound’s premier line with a reputation for going head-to-head with the most expensive equipment on the market, while costing a fraction of the price. Halo has earned honors and awards that are unmatched. The Parasound Halo JC 3+ is a High-Performance Dual-Mono Phono Preamplifier built with the highest quality parts, solid construction, and a very clean design. Like all Phono Preamplifiers, the JC 3+ must multiply the tiny audio signal generated by a high-end low-output moving coil (MC) or moving magnet (MM) phonograph cartridge and make it strong enough to deliver to the input of a line level preamplifier. Parasound's Halo JC 3+ is a dual mono design with unbalanced inputs and outputs using Vampire RCA jacks, plus balanced outputs using Neutrik XLR jacks. A variable MC load adjust independent for each channel from 50-550 ohms with dual gang potentiometers specially made for Parasound by Vishay.
John Curl is one of the finest analog audio designers of all time. In the ‘70s he designed mixing consoles for the Grateful Dead and Jefferson Airplane, then the original Mark Levinson JC 2, Vendetta Research, his own brand, a $75,000 phono stage for Constellation Audio. Since 1989 Curl has guided Parasound in developing amplifiers and preamplifiers with a reputation for superior sonics, high value and longevity.
A custom-made three-position input impedance/gain switch provides for 47k Ohm MM, variable impedance MC, and 47k Ohm MC. The latter is an ideal load for some MC cartridges and high-end moving iron cartridges. Variable MC load adjust independent for each channel from 50-550 ohms with dual gang potentiometers specially made for Parasound by Vishay.
Recording and broadcast studios use balanced connections exclusively because of their inherent ability to reject noise and hum, thus assuring the best sound. Certain high quality preamplifiers and surround controllers built for residential use utilize balanced connections with XLR jacks for the same reasons. All Parasound Halo series power amplifiers have balanced inputs with XLR jacks so you can take full advantage of their inherent noise reduction capability.
Separate high speed-soft recovery rectifiers, filter caps and voltage regulators for each channel. Large low ESD power supply filter caps offer greater reserve for head-snapping dynamics. Built-in AC line conditioner to prevent AC noise from polluting the circuits.
| PARA-JC3P-BL | PARA-JC3P-SL |
|---|---|
Standby: 1W Power On: 12W 115 or 230 VAC 50 - 60 Hz (Selected on Chassis Bottom) |
Standby: 1W Power On: 12W 115 or 230 VAC 50 - 60 Hz (Selected on Chassis Bottom) |
20Hz - 20kHz, +/- 0.2dB |
20Hz - 20kHz, +/- 0.2dB |
72dB at 1kHz |
72dB at 1kHz |
MM: 47kΩ MC: 50 - 550Ω variable, 47kΩ fixed |
MM: 47kΩ MC: 50 - 550Ω variable, 47kΩ fixed |
200 mV for 1 V output Total Gain: 14 dB Maximum Output: 8 V |
200 mV for 1 V output Total Gain: 14 dB Maximum Output: 8 V |
MM: > 87dB, input shorted, IHF A-weighted > 78dB, input shorted, unweighted MC: > 87 dB, input shorted, IHF A-weighted > 67 dB, input shorted, unweighted |
MM: > 87dB, input shorted, IHF A-weighted > 78dB, input shorted, unweighted MC: > 87 dB, input shorted, IHF A-weighted > 67 dB, input shorted, unweighted |
+9 Vdc to +12 Vdc, 5 mA |
+9 Vdc to +12 Vdc, 5 mA |
XLR Pin Identification 1 = Ground (Shield) 2 = Positive 3 = Negative (Return) |
XLR Pin Identification 1 = Ground (Shield) 2 = Positive 3 = Negative (Return) |
17.25" x 3.55" x 13.75" (438 x 89 x 350mm) (without feet) 17.25" x 4.13" x 16" (438 x 105 x 350mm) (with feet) |
17.25" x 3.55" x 13.75" (438 x 89 x 350mm) (without feet) 17.25" x 4.13" x 16" (438 x 105 x 350mm) (with feet) |
Net Weight: 19 lbs (8.6 kg) Shipping Weight: 26 lbs (11.8 kg) |
Net Weight: 19 lbs (8.6 kg) Shipping Weight: 26 lbs (11.8 kg) |
Power Consumption |
Frequency Response |
Audio Crosstalk |
Impedance Input |
Sensitivity Input |
Signal to Noise Ratio |
External Trigger Voltage |
Connectors |
Dimensions (W x H x D) |
Weight |
We want to make our Affiliate program as easy as possible. That’s why we process all claims directly, without any third party telephone tag. Specific warranty terms and details from the manufacturer are below. View the full Parasound Warranty.
This feature is not currently optimized for mobile devices. We apologize for any inconvenience this may have caused. Please access Keycap engravings from a tablet or desktop computer.
