Close
Have questions? Log in to access chat
Deliver warm, rich sound with the new LEA amps for outdoor and large commercial installations.
Wirepath’s expanded line includes direct burial speaker wire, Lutron-compatible wire, plenum-rated cables, and more.
Your choice is our mission: Snap One now offers Sanus and Chief mounts online.
Deliver enterprise-grade networking solutions and get 3X the Partner Rewards! *
*Terms and conditions apply.
WattBox provides three distinct ways to fix problems, reduce service calls, and prevent truck rolls. Combine WattBox’s scheduling and auto-reboot with OvrC Home and OvrC remote management, and you have a one-of-a-kind power conditioner.
Bring true 4K HDR entertainment to your customers with the latest laser light source projectors from Sony, offering crisp, vibrant HDR images, even in well-lit spaces.
New accessories and modules are available for the Control4® DS2 Door Station.
Bring world-renowned Triad sound to your architectural speaker projects with Triad PDX.
The Veranda 3 features Android TV, giving your customers access to over 700,000 movies and shows via their favorite apps.
All the installation tools you'll need to terminate Cleerline fiber cable and connectors quickly and cleanly.
This digital subwoofer amplifier with front panel display and dual sub outputs runs steady at 500 Watts at 4 ohm, and is fine-tuned with custom EQ settings to be used with our dual 8" in-wall, 10” hardscape, or 12” burial subs.
This digital subwoofer amplifier with front panel display and dual sub outputs runs steady at 500 Watts at 4 ohm, and is fine-tuned with custom EQ settings to be used with our dual 8" in-wall, 10” hardscape, or 12” burial subs.
This amp’s front panel screen displays the volume level and other control settings. Access the menu function screen using the selection knob to adjust volume, crossover, phase, and EQ settings. It also allows you to select sound mode, night mode, and power mode settings, and can assign an IR device ID for control system integration. Plus, there is a lock control setting that prevents accidental changes in settings.
This Episode® amplifier offers flexibility to enable or disable EQ settings. There are 3 custom EQ settings optimized for our subwoofers.
Intelligent power management allows the amp to turn on automatically, either when an audio signal is detected or by using a 12V trigger from your AV receiver or processor. An illuminated front-mounted push button also allows you to turn the amplifier on or off when set to the always-on mode.
RCA line level inputs and pass-through outputs allow you to connect additional amplifiers, while the 12V trigger input and output allows you to connect another 12V trigger device; the amp also has dual sub outputs in parallel configuration.
Rack ears with three fastening points help eliminate sag when the amp is installed into a rack, while top cover and side panel ventilation slots allow better airflow.
Features an IR port to connect an IR device. Simply connect an IR repeater or IR controls system to the IR port on the back of the amplifier, and set the device ID in the front panel controls menu.
A limiter circuit has been incorporated into the amp to protect the connected subwoofer from harsh or damaging distortion that could not only ruin the listening experience, but the woofer
| EA-AMP-SUB-1D-500R |
|---|
15.000 ohms |
500W RMS |
250W RMS |
100 mV for 500W output 4 ohms
|
< 0.2%
|
"1.1 db at 300 Hz (Flat EQ, LFE Crossover Setting) 1.5 dB at 20 Hz" |
2.6V |
TUV listed Tested under UL/EN60065 for US and Canada |
16.9" x 1.75" x 8.1 |
8.5 lb |
1U |
88 dB (5 kHz bandwidth relative to 500W @ 4 ohms)
|
1-Channel |
301-500W |
12V +/-1.2V no load 10.5 V with 100 mA load |
Impedance Input |
Power Output @ 4 ohm |
Power Output @ 8 ohm |
Sensitivity Input |
Total Harmonic Distortion (THD) |
Frequency Response |
12V Trigger |
Certifications |
Dimensions (W x H x D) |
Weight |
Rack Spacing |
Signal to Noise Ratio |
Channels |
Watts Per Channel |
External Trigger Voltage |
This Episode® Amplifier product has a 2-Year Limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products which have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to Snap One or a designated service center with prior notification and an assigned return authorization number (RA).
This feature is not currently optimized for mobile devices. We apologize for any inconvenience this may have caused. Please access Keycap engravings from a tablet or desktop computer.
