Processing...
logo

Have questions? Log in to access chat





Your request is being processed. Loading...
{0} Hour(s)
{0} Day(s)
{0} Week(s)
{0} Month(s)
{0} Year(s)

more info

Click on more info to Add to order and more

Episode® Digital Subwoofer Amplifier

- By ordering this product with custom specifications you acknowledge that the sale is final and the product may not be returned or exchanged.

- Send us a sample of the wood that you would like the speaker to match. Your order will be placed on hold for up to 14 days as we wait for your wood sample. Samples not received after 14 days will cause your order to be canceled. Please send your physical sample along with a copy of your Triad Order attached to the address listed below.

Triad Speakers
Sales - RUSH - Paint Sample
15835 NE Cameron Blvd.
Portland, OR 97230
- Your order will be placed on hold for up to 14 days as we wait for your color sample. Samples not received after 14 days will cause your order to be canceled. Your sample must be of a solid color. Wood, multi colored wallpaper/fabrics and faux finishes CANNOT be sent as samples for custom paint matching. Please send your physical color sample along with a copy of your Triad Order attached to the address listed below.

Triad Speakers
Sales - RUSH - Paint Sample
15835 NE Cameron Blvd.
Portland, OR 97230

Add to cart
Description
Specs
Support
Description
Description

Episode® Digital Subwoofer Amplifiers are capable of delivering tons of clean power at 4 ohms, making them perfect companions for the in-wall subwoofers. These single channel amplifiers feature EQ modes and variable power-on options.

Episode® Digital Subwoofer Amplifier

Episode® Digital Subwoofer Amplifiers are capable of delivering tons of clean power at 4 ohms, making them perfect companions for the in-wall subwoofers. These single channel amplifiers feature EQ modes and variable power-on options. That's a lot of talent wrapped in a 1U chassis.

Important Note - When two subwoofers are used in parallel configuration, the nominal impedance of each subwoofer should not be less than 8 ohm.

Connections

RCA line level connections allow you to connect additional amplifiers, while the 12V trigger allows you to connect another 12V trigger device; the amps also have dual sub outputs in parallel configuration.

Rack Mount Option

Whatever your installation requires, you will be prepared. At only 1U tall (1.75”), these amplifiers come with removable rubber feet and rack ears for direct rack mounting.

Multiple Power-on Options

Want the amplifiers always on? Don't want them on until they sense a signal? No wait, you want them to be controlled via a 12-volt trigger, right? The beautiful part is all three options are available to complement the ease of installation.

Controls

A rear-mounted rotary dial for crossover, phase, and volume control enables you to optimize any system for ultimate performance (150W only). A remote is included to provide convenient control over the EQ modes, volume settings, and power/stand-by mode (500W only).

Custom EQ Settings

EQ modes are provided for fast and simple selection of music or movies.

Cool Performers

At the heart of these units are highly efficient digital amplifiers. This cool-running technology produces clean, tight bass.

Subsonic Filter

A limiter circuit has been included at the input stage to protect the connected woofer(s) from harsh, damaging distortion that can not only ruin the listening experience, but the woofers themselves.

Specs
Specifications
EA-AMP-SUB-1D-150
150W RMS
80W RMS
140 mV for full output (LFE only driven); 150W with level control set to max
.10% 1W/2W 100Hz
30-200Hz (EQ Mode=Bypass)
TUV Listed & Tested under UL/EN60065 for US and Canada
1.75" x 16.9" x 8.1"; 2.1" x 19" x 8.1" with rack mounts & feet
5.9 lbs
1U
1-Channel
101-200W
2.0V - 20V
 
Power Output @ 4 ohm
Power Output @ 8 ohm
Sensitivity Input
Total Harmonic Distortion (THD)
Frequency Response
Certifications
Cutout Dimensions (W x H)
Weight
Rack Spacing
Channels
Watts Per Channel
External Trigger Voltage

2-Year Limited Warranty

This Episode® Amplifier product has a 2-Year Limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products which have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to Snap One or a designated service center with prior notification and an assigned return authorization number (RA).

Keycap engravings

This feature is not currently optimized for mobile devices. We apologize for any inconvenience this may have caused. Please access Keycap engravings from a tablet or desktop computer.