Your request is being processed. Loading...
{0} Hour(s)
{0} Day(s)
{0} Week(s)
{0} Month(s)
{0} Year(s)

more info

Click on more info to Add to order and more

BannerContent
Processing...

WattBox® In-Wall Power Conditioner

WB-200-IW-1G-2

- By ordering this product with custom specifications you acknowledge that the sale is final and the product may not be returned or exchanged.

- Send us a sample of the wood that you would like the speaker to match. Your order will be placed on hold for up to 14 days as we wait for your wood sample. Samples not received after 14 days will cause your order to be canceled. Please send your physical sample along with a copy of your Triad Order attached to the address listed below.

Triad Speakers
Sales - RUSH - Paint Sample
15835 NE Cameron Blvd.
Portland, OR 97230
- Your order will be placed on hold for up to 14 days as we wait for your color sample. Samples not received after 14 days will cause your order to be canceled. Your sample must be of a solid color. Wood, multi colored wallpaper/fabrics and faux finishes CANNOT be sent as samples for custom paint matching. Please send your physical color sample along with a copy of your Triad Order attached to the address listed below.

Triad Speakers
Sales - RUSH - Paint Sample
15835 NE Cameron Blvd.
Portland, OR 97230

PDPRewardPointsEspot
Add to cart
Description
Specs
Support
FAQs
Description
Description

Good things do come in small (and hidden!) packages. This WattBox® 200 Series In-Wall Power Conditioner features a recessed in-wall design that cuts down on bulk, making it perfect for low-profile, flat panel installations. It offers 1080 Joules of surge protection, as well as noise filtration that conditions the signal to remove EMI / RFI interference. Combine these with the product’s smart safety features, and you get a power conditioner that’s equipped to provide the best AV experience possible.

In-Wall Power Conditioner

Good things do come in small (and hidden!) packages. This WattBox® 200 Series In-Wall Power Conditioner features a recessed in-wall design that cuts down on bulk, making it perfect for low-profile, flat panel installations. It offers 1080 Joules of surge protection, as well as noise filtration that conditions the signal to remove EMI / RFI interference. Combine these with the product’s smart safety features, and you get a power conditioner that’s equipped to provide the best AV experience possible.

Important Note - This product may not fit some metal and composite J-boxes. A compatible plastic Carlon retro-fit J-box is included.
@@altText

Total Outlets

@@altText

Surge Protection

@@altText

Filter Banks

@@altText

Perfect Size

In-wall surge protection, conditioning, and noise filtration just got a whole lot easier thanks to this WattBox’s convenient single gang form factor. For your convenience, we included a compatible retrofit backbox, mounting screws, and wire nuts in the same package.

Note - A single-gang faceplate is attached to the power conditioner. This plate is not removable or gangable and this power conditioner will not fit side by side with a second single-gang conditioner in a two-gang box.

Noise Filtration

All WattBox power conditioners feature noise filtration that cleans up this "dirty power" to deliver the purest A/V experience possible. By lowering the audio noise floor and reducing hum, you hear exactly what was intended. Video performance can see an improvement too.

AC Disconnect

As an added precaution, in the event of a catastrophic spike, a thermal fuse completely disconnects AC power from your system to stop the surge in its tracks before it can get to your connected equipment. All three "legs" of the power (hot, neutral and ground) will disconnect for unsurpassed equipment protection.

Surge Protection

Surges can come from a variety of sources, but this excess energy can damage your connected equipment if not properly protected. The Joule rating is a measure of a surge protector's ability to "clamp" this excess energy down to a safe level – the higher the rating, the more protection your equipment has.

Specs
Specifications
WB-200-IW-1G-2-WHT
40 dB @ 150 kHz to 100 MHz
1440
2 Continuous
UL
2.75" x 475" x 2"
Features Disconnect Circuitry
In Wall
465 lb
 
EMI/RF Filtration
Energy Dissipation (Joules)
Outlets
Certifications
Dimensions (W x H x D)
Features
Mounting
Weight
Support
ProductPageSupportTabEspot
FAQs
FAQ

General

  • How much does OvrC cost?
    OvrC is a free service. All it takes to start using it is about 5 minutes of learning and setup. For already-installed WattBoxes, a simple firmware update will enable use with OvrC.
  • How do I get access to my OVRC account?
    We created a standalone app for iOS devices that can be downloaded from the app store. You can also access your account using any computer or mobile device with a capable web browser and Internet access. We will continue developing new ways to access and use your account over time.
  • What about my customers? Is there a customer facing OvrC app?
    No. The OvrC service was built for dealers to more easily provide service to customers. For control of the WattBox at a user level, we recommend integrating a control system solution (and our prewritten drivers) that includes a customer-facing control panel or app.
  • Several folks in my company have signed up for separate accounts and can only see their individual customers’ WattBoxes. Can I merge those into a single company account?
    Yes. Please call us and we’ll get this taken care of for you!
  • Can I invite coworkers to my company’s OvrC account?
    Yes. If you are the account owner, you can create an account and invite additional users to that account. All users on that account will be able to see all WattBoxes – great for on-call technicians. If you want certain OvrC devices to be accessible to certain users, you will need to create individual accounts (instead of inviting them from your account).
  • Setup & Installation

  • Can I set up my existing WattBox IP devices to use OvrC too?
    Yes. You can add your existing devices after applying an onsite firmware upgrade.
  • Where can I find the MAC address that OvrC asks for when I add a new device?
    The MAC address can be found on the small white sticker on the underside of the WattBox, or on the decal attached to the OvrC Quick Start Guide (in the WattBox packaging).
  • When I try to add a device, it says the firmware isn't supported. What is wrong?
    Your WattBox was likely purchased prior to July 10, 2014 and is therefore running older firmware that is not supported on OvrC. Upgrade your WattBox to the latest firmware version WBX.4603 (or newer) and try adding it again.
  • Do I need to assign a static IP address to OvrC devices on my network?
    If you are using an IP control system driver to control outlets on your WattBox, yes. Otherwise, a static IP address is not required.
  • Do I still need to do port forwarding or assign DDNS addresses for OvrC devices?
    Not in most cases. OvrC equipment communicates directly with our servers as long as there is a stable Internet connection. Advanced network setup like port forwarding or DDNS is no longer required unless you want to use some of the advanced settings through the WattBoxIP web interface (for example, setting a static IP address).

Lifetime Limited Warranty

This WattBox® product has a Lifetime Limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products which have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to SnapAV or a designated service center with prior notification and an assigned return authorization number (RA).

ProductPageEnd