Close
Products:59
Documents & Videos: 0
- 12 Volt, 8 Ah
- Terminals: .187" F-1 Faston Tab
- Long life and greater AH capacity
- Auto-Resetting (PTC) Fused Secondary
- Electrical outlet mounting tab
- Grounding Prong & Terminal
- UL Listed
- Wire Strain Relief
- Efficiency Level VI
- High Quality Large Cross Head Screw Terminals
- Positive Or Negative Activation
- Low Current Draw
- High Quality Cross-head Terminals
- Low Current Draw
- Voltage Input LED
- High Quality Large Cross Head Screw Terminals
- Positive Or Negative Activation
- Low Current Draw
- Super Low 1.2 mA Trigger Current
- Positive ( ) Or Negative (-) Trigger Input
- Double Form “C” Contacts DPDT
- Super Low 1.2 mA Trigger Current
- Positive ( ) Or Negative (-) Trigger Input
- Double Form “C” Contacts DPDT
ELK-960
- 12 to 24 Volt DC Operation
- Adjustable Time Delay
- SPDT (Form “C”) Relay
- Convenient On/Off Switch, Disconnects battery if voltage falls below 10V DC
- Works with most 12V DC control panels and power supplies
- Lifetime LimitedWarratny
- Permanent Rubber Adhesive
- Individual Piece Size: 1/2″ x 1-1/2″ x 1/4″ Thick
- Package Includes 130 Individual Pieces
ELK-BLTLABELS
- Self-adhesive test data labels may be used for recording each inspection
- Label Size: 3.5″ x 2″
- Ideal for long-life label applications
- Dual reporting pathways: IP and cellular
- No dial capture, data bus decoding, or cloud servers to delay or compromise communications
- Auto directs over first available and/or best pathway for quickest communications
- Comprehensive detection and reporting with hybrid flexibility - wired, wireless, or both.
- Supports Two-Way Wireless or 319.5 MHz wireless sensors
- Wi-Fi capability for ease of installation when a wired network connection is not available
ELK-ELK7TS
- Connects to network via Wi-Fi
- Connects to E27 or M1 over local network
- Ultra Low Profile screen with slim wall mount plate
ELK-M1DBH
- Designed For Multiple Home Run Cables
- Internally Connects Data A & B Lines From Previous Device In to Next Device Out
- Provides up to Nine (9) Data Bus Connections
- Adds up to 144 individual wireless zones (sensors/points)
- Operates from the 4 wire RS485 Data Bus
- Additional Receivers (up to 9) may be Connected to a single M1 or M1EZ8 Control for redundancy or greater coverage
ELK-M1XRFTWM
- Operating Frequency: 902 Mhz to 928 Mhz
- Sensitivity: >105 dbm
- Operating Temperature: 0 to +120 degrees F
ELK-P212S
- Regulated 12V DC Output with up to 2 As of current
- Energy Efficient ESMT - Elk Switch Mode Technology ensures low idle power with maximum output headroom
- Automatic output over-current protection (PTC)
ELK-M1DBHR
- Allows use of existing wiring in retrofit installations
- Support 4-conductor home run wiring to the M1 data bus
- Accepts up to 8 home runs
