Your request is being processed. Loading...
{0} Hour(s)
{0} Day(s)
{0} Week(s)
{0} Month(s)
{0} Year(s)

more info

Click on more info to Add to order and more

BannerContent
Processing...

Episode® Digital Amplifier with 70 Watts per Channel

EA-AMP-70
Channels
PDPRewardPointsEspot
Add to cart
Description
Specs
Support
FAQs
Description
Description

These efficient, class-D Episode® Digital Amplifiers deliver a powerful 70 watts RMS per channel. Available with 8 or 12 channels, these amps are perfectly at home in multi-room audio applications, They feature audio sensing turn-on, loop outputs, adjustable gain control, and bridgeable outputs, giving installers the versatility required for today's sophisticated audio systems.

Episode® Digital Amplifier with 70 Watts per Channel

These efficient, class-D Episode® Digital Amplifiers deliver a powerful 70 watts RMS per channel. Available with 8 or 12 channels, these amps are perfectly at home in multi-room audio applications, They feature audio sensing turn-on, loop outputs, adjustable gain control, and bridgeable outputs, giving installers the versatility required for today's sophisticated audio systems.

@@altText

Audio Sensing

Audio-sense is perfect for multi-room audio – when the last source shuts down, the amplifier will gracefully go into a power-saving standby mode. The 12V trigger inputs and outputs allow you to use a preamp or control system to turn the amp on or off, or have it "wake up" another device when the amp is activated.

@@altText

Bridgeable Speaker Outputs

For larger speakers or high-power applications, bridgeable channels allow you to combine any 2 channels into a single 140W channel. For example, run 2 “standard” zones of audio plus one high power zone. Or use these amplifiers as ultimate bi-amping solutions for two-channel applications with 4 bridged channels.

@@altText

Gain Controls

These amps offer gain adjustments for each channel pair, allowing you to independently trim output levels in each zone whether using the global or line level inputs. In volume control-based systems, these may be used to prevent harmful clipping that could cause damage to the amplifier or speakers.

@@altText

Loop Outputs

From single source with volume controls to independent sources at each room – or any combination in between – this amplifier has the flexibility you need. Global A/B provides two independent global sources that can be mapped to desired channel pairs. When using a stack of amplifiers, the loop outputs are a convenient way to daisy-chain the signal to downstream components.

ESD & Surge Protection

Multi-room AV environments can be tough on an amplifier. Each speaker run acts like an antenna, so all kinds of nasty things can happen when the weather changes. That’s why we engineered this amp with surge protection components that exceed CE Level 3 standards. During development, every connection – all speaker outputs, RCA connectors even the power input - were ESD tested with up to 15,000V and Surge tested at 2,400V.

Improvements

This amplifier was engineered for not only the best surge protection but also with an isolated common ground for the audio circuits. The result is a great sounding, and reliable system that your customer will enjoy for years.

Installation Flexibility

A slim 2U chassis takes up less space when stacked on a shelf or installed in a rack. Included removable rack ears and amplifier feet give you the flexibility to install it where you need it.

GEMtech™

Green Energy Management technology is a stringent product design criteria established by SnapAV that focuses on energy savings through active energy management circuitry.

Specs
Specifications
EA-AMP-8D-70A EA-AMP-12D-70A
8
12
20,000 ohm
20,000 ohm
70W
70W
50W
50W
140W
140W
500mV
500mV
Class D
Class D
<0.1%
<0.1%
20 Hz to 20 kHz
20 Hz to 20 kHz
Black
Black
17" x 4" x 13"
17" x 4" x 13"
800W
1110W
115-230V AC
115-230V AC
25.3 lbs
32 lbs
2U
2U
95 dB
95 dB
 
Channels
Impedance Input
Power Output @ 4 ohm
Power Output @ 8 ohm
Power Output Bridged @ 8 ohm
Sensitivity Input
Topology
Total Harmonic Distortion (THD)
Frequency Response
Color
Dimensions (W x H x D)
Power Consumption
Line Voltage
Weight
Rack Spacing
Signal to Noise Ratio
Support
ProductPageSupportTabEspot
FAQs
FAQ

General

  • Are two bridged channels on your EA-AMP-12D-70A still stable to 4 ohms?
    No, when 2 channels are bridged, the output of the bridged channel is significantly increased but the minimum impedance of each connection remains the same, so the impedance of a bridged connection will double the normal impedance. For example: bridging two 4 ohm channels will result in a single channel with significantly increased output but the minimum impedance the channel can operate safely at now is 8 ohms.

2-Year Limited Warranty

This Episode® Amplifier product has a 2-Year Limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products which have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to SnapAV or a designated service center with prior notification and an assigned return authorization number (RA).

ProductPageEnd