Your request is being processed. Loading...
{0} Hour(s)
{0} Day(s)
{0} Week(s)
{0} Month(s)
{0} Year(s)

more info

Click on more info to Add to order and more

BannerContent
Processing...

Binary™ 320 Series 1080p over 1CAT Extender with IR (In-Wall RX)

B-320-1CAT-W

- By ordering this product with custom specifications you acknowledge that the sale is final and the product may not be returned or exchanged.

- Send us a sample of the wood that you would like the speaker to match. Your order will be placed on hold for up to 14 days as we wait for your wood sample. Samples not received after 14 days will cause your order to be canceled. Please send your physical sample along with a copy of your Triad Order attached to the address listed below.

Triad Speakers
Sales - RUSH - Paint Sample
15835 NE Cameron Blvd.
Portland, OR 97230
- Your order will be placed on hold for up to 14 days as we wait for your color sample. Samples not received after 14 days will cause your order to be canceled. Your sample must be of a solid color. Wood, multi colored wallpaper/fabrics and faux finishes CANNOT be sent as samples for custom paint matching. Please send your physical color sample along with a copy of your Triad Order attached to the address listed below.

Triad Speakers
Sales - RUSH - Paint Sample
15835 NE Cameron Blvd.
Portland, OR 97230

PDPRewardPointsEspot
Add to cart
Description
Specs
Support
FAQs
Description
Description

As displays get thinner and thinner, finding places behind the screen to hide HDMI extenders and power supplies gets tougher and tougher. Cut the clutter and get a cleaner install with the Binary™ Single Cat 5e/6 HDMI 3D Extender. It transmits full HDMI 3D and bidirectional IR up to 130’ over a single Cat5e/6 cable. The recessed, in-wall receiver makes the most out of the shrinking space behind TVs, providing room for bulky connectors. It even has a remote powering option to eliminate the need for a power supply behind the TV.

Binary™ 320 Series 1080p over 1CAT Extender with IR (In-Wall RX)

As displays get thinner and thinner, finding places behind the screen to hide HDMI extenders and power supplies gets tougher and tougher. Cut the clutter and get a cleaner install with the Binary™ Single Cat 5e/6 HDMI 3D Extender. It transmits full HDMI 3D and bidirectional IR up to 130’ over a single Cat5e/6 cable. The recessed, in-wall receiver makes the most out of the shrinking space behind TVs, providing room for bulky connectors. It even has a remote powering option to eliminate the need for a power supply behind the TV.

@@altText
Design Change - To simplify installation, we have made a running design change to this product. Power is no longer supplied to the transmitter’s IR input, meaning you don’t need to use the IR dongle when connecting it to a control system. Power is still supplied at the receiver’s IR input for quick connection of an IR receiver. Also, we’ve updated the IR circuitry board to accept from 3.5V to 12V to provide broader support of various IR systems.
Important Note - This product does not fit metal junction boxes. Instead, we recommend using our single gang trim ring – Item# LV1. Shielded CAT5e/CAT6 and shielded RJ45 connectors are strongly recommended for this product. Unshielded or improperly terminated cables may be susceptible to video dropout problems from ceiling fans and other EMI issues. Please note: for proper shielding, shielded connectors must be used with drains connected at both ends. In addition, “EZ end” connectors are not recommended for use with HDMI extenders.
Power Supply - Binary 1 Cat HDMI extenders use a 5 Volt DC power supply. Binary HDBaseT extenders use a 24 Volt DC power supply, and matrix switchers with integrated Cat 5 extenders use 12 Volt DC supplies. Using any 12 or 24 Volt DC power supply with any 5 Volt Binary products will result in damage to the product and possibly the power supply. Be sure to use the correct power supply with the correct product
@@altText

Remote Powering

If there's no outlet near your receiver, you can remotely power the extender. Everything you need is in the box - the removable screw terminal and the female power supply adapter - so just add a 16- or 18-gauge 2-conductor wire, and you're ready go. The power supply can easily go in a rack or other out-of-the-way place.

@@altText

Perfect Fit

Having more options is never a bad thing. That’s why this wall plate receiver is specifically designed to fit any single-gang J-box. It comes with a basic white decora plate, but you can swap it out for whatever color matches the install.

Built In ESD & Surge Protection

Intelligent circuit design, perfected through extensive hardware testing, has resulted in a very robust product with excellent ESD and surge protection that exceeds CE Level 3 standards. During development, they were hit with ESD at 15KV and surges up to 2500V.

HDMI® (with 3D)

This extender offers full support of HDMI® (with 3D), Deep Color and HDCP 2.0, as well as support for Dolby® True HD, Dolby® Digital Plus, DTS™-HD Master and LPCM audio formats.

Bi-Directional IR

Over the same CAT5e cable, you can easily send commands from a control system to the TV – and simultaneously control DVD players, cable boxes and other source equipment from the TV location.

Locking Power Plug

Our in-line power supply has a screw lock to secure the power to the unit. No more worries about service calls just because the plug fell out when the TV was moved.

Specs
Specifications
B-320-1CAT-HDIR-W
Yes
HDMI 3D
HDMI Type A 19-pin
Carrier frequency: 20-60kHz
5 Volts (peak-to-peak, TTL)
Human Body (air gap): 15kV; Human Body (contact): 8kV; Core chipset: +/-8kV
1CAT
Latch-locking
1.2 Volts (peak to peak)
6.75 Gbps
Black
1 x 3.5mm Stereo
Metal
20-90% RH (no condensation)
32-104°F
3W Max
5V DC 4A
Each
1.1 lbs
1U
 
HDCP Compliance
HDMI Compliance
HDMI Connector Type
IR Signal Frequency
Input DDC Signal
ESD Protection
Extender Technology
Power Connection Type
Input TMDS Signal
Supported Video Bandwidth
Color
IR Inputs
Construction
Operating Humidity
Operating Temperature
Power Consumption
Line Voltage
Sold As
Weight
Rack Spacing
Support
ProductPageSupportTabEspot
FAQs
FAQ

Audio & Video

  • I am experiencing a momentary loss of picture when certain household items power on. How can I fix this?
    This issue is caused by electromagnetic interference. If standard connectors are being used on a shielded cable, change to shielded connectors. If shielded category wire and connectors are in place, make sure that continuity of the shield is maintained from the shielded connector on one side to the shielded connector on the other side. If the wiring is not shielded, consider running a shielded cable. See the HDMI Distribution Best Practices document for more information on preventing picture issues.
  • When using an HDMI extender I am seeing "sparkles" in the picture on the display.
    Typically this is caused by long lengths of HDMI cable. We recommend minimizing this length to 1 meter or less.
  • Control & Programming

  • How do I add additional emitters to the single emitter output of the HDMI extender?
    By using an IR1x4 or IR 2x6 block, a mono cable , and as many IRF-1's or -2's as you need to flash each of your connected devices. Connect the mono cable to the flasher out port on the B-200-1CAT-HDIR, connect the mono-stereo adaptor included with the extender to the end of the mono cable, and plug the other end of the adaptor into the receiver port on the IR block.
  • Does the IR on a HDIR series of extenders output on the same end as it is input?
    No. The IR passes from one end to the other but does not output on the same end.
  • Features & Support

  • Does this HDMI extender support 3D?
    Yes. The maximum supported distance for 3D currently is 65 feet. See the Manual for details on setting the unit to pass 3D.
  • Do your extenders automatically reset after a power outage?
    All of our HDMI extenders (1 cat and HDBaseT) automatically reset after power failures, restoring signal without the need to manually cycle power.
  • Setup & Installation

  • Is it necessary to use 1m or less cables at the transmit & receive ends of the extenders?
    While not critical for proper operation, we strongly recommend 1 meter or shorter, high speed rated HDMI cables. This is to ensure steady picture reproduction and reliability. If any issues arise with longer HDMI cables, change them to 1 meter or less before any other troubleshooting.
  • Why do you recommend using shielded CAT5 wire with your extenders?
    Shielded wire and connectors greatly improve noise rejection, which enhances performance and minimizes the chance of signal dropouts. See the "HDMI Distribution Best Practices" document for more information on preventing picture issues.
  • Is it acceptable to use pre-made CAT5 patch cables with your extenders?
    We do not recommend premade patch cables because of the limited bandwidth resulting from the the use of stranded wire in their construction.
  • Do the EZ style RJ-45 connectors really make a difference when installing HDMI extenders?
    Yes, they can be easily wiggled loose, causing a short or an improper connection.
  • EDID learning (mode 7) is not working with Samsung displays.
    On Samsung displays, we recommend mode 1 for standard viewing or mode 6 for 3D. See the Installation Manual for complete instructions on setting the EDID mode correctly.
  • Do you have to use the 568B standard with our non-HDBaseT-T extenders?
    While not critical for proper operation, we strongly recommend 568B terminations due to the amount of bandwidth needed to transmit HDMI signal. The pin out is printed on the bottom of each piece of the extender for easy reference.

2-Year Limited Warranty

This Binary™ product has a 2-year limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty will not apply to products that have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to Snap One or a designated service center with prior notification and an assigned return authorization number (RA).

ProductPageEnd