Your request is being processed. Loading...
{0} Hour(s)
{0} Day(s)
{0} Week(s)
{0} Month(s)
{0} Year(s)

more info

Click on more info to Add to order and more

BannerContent
Processing...

Binary™ 320 Series 1080p over 2CAT Extender

HD-2CAT-1080P

- By ordering this product with custom specifications you acknowledge that the sale is final and the product may not be returned or exchanged.

- Send us a sample of the wood that you would like the speaker to match. Your order will be placed on hold for up to 14 days as we wait for your wood sample. Samples not received after 14 days will cause your order to be canceled. Please send your physical sample along with a copy of your Triad Order attached to the address listed below.

Triad Speakers
Sales - RUSH - Paint Sample
15835 NE Cameron Blvd.
Portland, OR 97230
- Your order will be placed on hold for up to 14 days as we wait for your color sample. Samples not received after 14 days will cause your order to be canceled. Your sample must be of a solid color. Wood, multi colored wallpaper/fabrics and faux finishes CANNOT be sent as samples for custom paint matching. Please send your physical color sample along with a copy of your Triad Order attached to the address listed below.

Triad Speakers
Sales - RUSH - Paint Sample
15835 NE Cameron Blvd.
Portland, OR 97230

PDPRewardPointsEspot
Add to cart
Description
Specs
Support
FAQs
Description
Description

Need to deliver 1080p over a long distance, but can't use long-run HDMI®? No problem. Two Cat5e cables and the Binary™ HDMI over Dual Cat5e/6 Extender solves your problem. It offers support for 1080p, HDMI 3D, Dolby TrueHD and more up to 130 feet.

Binary™ 320 Series 1080p over 2CAT Extender

Need to deliver 1080p over a long distance, but can't use long-run HDMI®? No problem. Two Cat5e cables and the Binary™ HDMI over Dual Cat5e/6 Extender solves your problem. It offers support for 1080p, HDMI 3D, Dolby TrueHD and more up to 130 feet – plus it features a single, installer-friendly power supply.

@@altText
Important Note - It is recommended that you use conventional RJ45 ends with this product. “EZ end” connectors are not intended for use with HDMI® extenders.
@@altText

Improved Reliability

Contrary to 2-layer circuit boards, a 4-layer board ensures better grounding and greater reliability. The new chipset also offers two levels of protection - at the connector 15kV/8kV and at the chipset 8kV. Lastly, use the EQ dial to optimize the signal every time.

HDMI® (3D, 6.75 Gbps)

Meets HDMI® (3D) specification requirements for trouble-free performance in demanding, high-bandwidth applications.

Easy to Install

The durable low-profile metal cases (less than 1" tall) come equipped with mounting ears for a variety of installation needs.

Installer Friendly

We provide a power cord with an in-line transformer so you don't have to try to fit an oversized AC plug into a recessed outlet.

Specs
Specifications
HD-2CAT-1080P-130
HDMI Type A 19-pin
Surround sound (up to 7.1ch) or stereo digital audio
5 Volts (peak-to-peak, TTL)
1.2 Volts (peak to peak)
Single-link 225MHz (6.75 Gbps)
Black
3.6" x .9" x 3.3"
Metal
20-90% RH (no condensation)
32-104°F
1.5W Max
5V DC 4A
Each
.77 lbs
1U
480i; 480p;720p; 1080i; 1080p up to 36-bit color
 
HDMI Connector Type
Supported Formats
Input DDC Signal
Input TMDS Signal
Supported Video Bandwidth
Color
Dimensions (W x H x D)
Construction
Operating Humidity
Operating Temperature
Power Consumption
Line Voltage
Sold As
Weight
Rack Spacing
Supported Resolutions
Support
ProductPageSupportTabEspot

Technical Drawings

Binary HDMI over Dual Cat5e/6 Extender AutoCAD Drawing
Binary HDMI over Dual Cat5e/6 Extender AutoCAD Drawing
To download, right click on the link and select 'Save Link As'
FAQs
FAQ

Audio & Video

  • Why am I having issues when sending the HDMI output of my AVR through an extender?
    Sometimes the built in scaling of an AVR can disrupt the timing of the HDMI signal as it passes through an extender. We recommend that the scaling processor be disabled in the AVR any time an extender is being used in the same signal path.
  • When using an HDMI extender I am seeing "sparkles" in the picture on the display.
    Typically this is caused by long lengths of HDMI cable. We recommend minimizing this length to 1 meter or less.
  • I am experiencing a momentary loss of picture when certain household items power on. How can I fix this?
    This issue is caused by electromagnetic interference. If standard connectors are being used on a shielded cable, change to shielded connectors. If shielded category wire and connectors are in place, make sure that continuity of the shield is maintained from the shielded connector on one side to the shielded connector on the other side. If the wiring is not shielded, consider running a shielded cable. See the HDMI Distribution Best Practices document for more information on preventing picture issues.
  • Why can't I get a stable picture on a run over about 65 feet from my BluRay player to the display?
    Make sure that Deep Color is turned off in the BluRay player. Deep color uses a lot more bandwidth than standard 1080p and this can cause picture and sync issues if the run is too long.
  • Features & Support

  • Does this HDMI extender support 3D?
    Yes. The maximum supported distance for 3D currently is 65 feet. See the Manual for details on setting the unit to pass 3D.
  • Do your extenders automatically reset after a power outage?
    All of our HDMI extenders (1 cat and HDBaseT) automatically reset after power failures, restoring signal without the need to manually cycle power.
  • Which end does the HD-2CAT-1080P-130 power from?
    Either the Transmitter or the Receiver may be powered.
  • Setup & Installation

  • Is it necessary to use 1m or less cables at the transmit & receive ends of the extenders?
    While not critical for proper operation, we strongly recommend 1 meter or shorter, high speed rated HDMI cables. This is to ensure steady picture reproduction and reliability. If any issues arise with longer HDMI cables, change them to 1 meter or less before any other troubleshooting.
  • Why do you recommend using shielded CAT5 wire with your extenders?
    Shielded wire and connectors greatly improve noise rejection, which enhances performance and minimizes the chance of signal dropouts. See the "HDMI Distribution Best Practices" document for more information on preventing picture issues.
  • Why do you recommend avoiding the use of RJ45 wall plates or punch down blocks with your extenders?
    Wall plates or punch down blocks reduce total bandwidth of the run, and allow for interference to affect signal more easily. See the "HDMI Distribution Best Practices" document for more information on preventing interference.
  • Is it acceptable to use pre-made CAT5 patch cables with your extenders?
    We do not recommend premade patch cables because of the limited bandwidth resulting from the the use of stranded wire in their construction.
  • Do the EZ style RJ-45 connectors really make a difference when installing HDMI extenders?
    Yes, they can be easily wiggled loose, causing a short or an improper connection.
  • Do you have to use the 568B standard with our non-HDBaseT-T extenders?
    While not critical for proper operation, we strongly recommend 568B terminations due to the amount of bandwidth needed to transmit HDMI signal. The pin out is printed on the bottom of each piece of the extender for easy reference.

2-Year Limited Warranty

This Binary™ product has a 2-year limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty will not apply to products that have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to Snap One or a designated service center with prior notification and an assigned return authorization number (RA).

ProductPageEnd