Close
Description
Specs
Support
Description
Description
This wireless receiver offers premium features and more for your most common wireless systems. With channel grouping, true diversity reception and hi/low transmission powers, it’s perfect for training rooms, auditoriums, and stage performances.
Sense UHF Wireless Microphone Receiver
This wireless receiver offers premium features and more for your most common wireless systems. With channel grouping, true diversity reception and hi/low transmission powers, it’s perfect for training rooms, auditoriums, and stage performances.
New Regulations - Due to recent regulations from the Federal Communications Commission (FCC) and the repurposing of the 600MHz band of the UHF spectrum, SnapAV is required to transition to an all-new Sense product line which will operate in the 500Mhz band. All Sense products currently operating in the 600Mhz spectrum band will be discontinued as of October 13, 2018, and will not be compatible with devices operating in the 500Mhz spectrum band. Starting July 13, 2020, FCC regulations will prohibit use of the 600MHz band of the UHF spectrum by consumer devices. Learn more about affected SKUs >>
Compatibility - This unit will not function as a stand-alone device. It must be paired with a hand or bodypack transmitter (SE-300-WT). This receiver can only be used with a single transmitter at a time. Two transmitters may be paired with one receiver, however the system will not function properly if both transmitters are turned on at the same time. If you would like to use two transmitters with one receiver (such as a handheld and a body pack), then please only turn on one transmitter at a time.
Reliable Wireless
Wireless that never cuts out is hard to find. But with our true diversity antenna system and hi/low power settings for up to 1500 feet, you always have excellent coverage.
Rack Mountable
With 1 RU rack ears in the box, you don't have to worry about forgetting anything. The rack ears allow for the antennas to be front mounted, and we even include the jumper cables in the box.
Adjustable Gain
Thanks to an easy-to-access gain on the front of the receiver, setting the audio output level on the fly is simple. And with RF and AF meters, you can see the status from the front panel, too.
Specs
Specifications
| SE-300-WR-1CHD |
|---|
600 ohm |
<0.6%@1KHz |
1 XLR Balanced Socket, 1/4" unbalanced phone jack |
8.35" x 1.50" x 5.67" |
1U Rack Ears w/ Antenna Mounts, Power Supply |
>105dB |
638-674 MHz |
-12dB |
Pilot Tone & Noise Mute |
Dual, Half-wave |
Power On/Off, Frequency Up/Down, Lock, ID Pairing, Remoset |
1 year |
Impedance Output |
Total Harmonic Distortion (THD) |
Connector Type |
Dimensions (W x H x D) |
Included Accessories |
Signal to Noise Ratio |
Frequency Range |
Audio Output Level |
Squelch |
Antennas |
Controls |
Warranty |
Support
Manuals and Guides
Exclusive Brand Warranty
This product has a Limited Warranty, subject to the terms and conditions of the ADI Exclusive Brands Limited Hardware Warranty Click Here.
Keycap engravings
This feature is not currently optimized for mobile devices. We apologize for any inconvenience this may have caused. Please access Keycap engravings from a tablet or desktop computer.
