Close
Atlona® 4K/UHD Power Sourcing HDMI HDBaseT Receiver with Ethernet, Control, and PoE
AT-UHD-EX-100CE-RX-PSE
Description
Specs
Support
Description
Description
The Atlona® AT-UHD-EX-100CE-RX-PSE is a 4K/UHD HDMI HDBaseT receiver for AV signals up to 330 feet (100 meters) over category cable with Ethernet pass-through, RS-232, CEC, and Power over Ethernet (PoE).
Atlona® 4K/UHD Power Sourcing HDMI HDBaseT Receiver with Ethernet, Control, and PoE
The Atlona® AT-UHD-EX-100CE-RX-PSE is a 4K/UHD HDMI HDBaseT receiver for AV signals up to 330 feet (100 meters) over category cable with Ethernet pass-through, RS-232, CEC, and Power over Ethernet (PoE). It receives video signals up to 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling, plus embedded multi-channel audio. The AT-UHD-EX-100CE-RX-PSE is HDCP 2.2 compliant and supports EDID communication. It is ideal for use with the AT-UHD-EX-100CE-TX-PD HDBaseT transmitter, or an HDVS 200-Series HDBaseT switcher for extending 4K signals to a display. This receiver features a quarter rack width metal enclosure, with rear panel I/O ports for uncluttered wire management. The AT-UHD-EX-100CE-RX-PSE is externally powered by the included power supply.
4K/UHD Capability @ 60 Hz with 4:2:0 Chroma Subsampling
- Compatible with Ultra High Definition sources and displays
- Full support of 4K/UHD streaming services and playback devices
HDCP 2.2 Compliant*
- Adheres to latest specification for High-bandwidth Digital Content Protection
- Allows protected content stream to pass between devices
- *The AT-UHD-EX-100CE-RX-PSE will only be HDCP 1.4 compliant when used with an HDVS-200 Series HDBaseT switcher.
Supports 4K HDR10 @ 24 Hz
- Extends 4K HDR10 @ 24 Hz (4:2:0 chroma subsampling, 10-bit color)
PoE Power Source – Remotely Powers a PoE-Compatible Transmitter
- IEEE 802.3af PoE Power Sourcing Equipment (PSE)
- Uses external power supply (included) to power a PoE-compatible transmitter over HDBaseT
- Eliminates the need for the receiver to be powered remotely or by a power-injection device
AV, Ethernet, Power, and Control over HDBaseT
- Receives 4K/UHD video, embedded audio, 100Base-T Ethernet, power, and control through a single cable
- Eliminates multiple cable runs between source, control system, router, and display
- Ethernet pass-through is not available on the AT-UHD-EX-100CE-RX-PSE receiver when used with the UHD-PRO3 Series matrix switchers.
Extended Distance HDMI Extension
- Receives HDMI signals up to 330 feet (100 meters) @ 1080p with CAT5e/6 or 4K/UHD using CAT6a/7 cable
- Uses easy-to-integrate category cable for low-cost, reliable system installation
Extends RS-232, CEC, and Ethernet Control Signals*
- Control signals travel over HDBaseT link to device for maximum control system flexibility
- Simplifies integration of source, control system, and display
- * The AT-UHD-EX-100CE-RX-PSE does not include I/O ports for IR control signals extended over HDBaseT. If IR control over HDBaseT is required, please refer to the AT-UHD-EX-100CE-RX.
Specs
Specifications
| AT-UHD-EX-100CE-RX-PSE |
|---|
HDMI 2.0b, HDCP 2.2 |
4096×2160@24/25/30/50/60Hz, 3840×2160@24/25/30/50/60Hz, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480i NOTE: 4096×2160@50/60Hz & 3840×2160@50/60Hz supported @ chroma subsampli |
2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480 NOTE: All VESA resolutions are 60Hz. |
YCbCr, RGB |
4:4:4, 4:2:2, 4:2:0 |
8-bit, 10-bit, 12-bit |
4K HDR10 @ 24Hz, 4:2:0 chroma subsampling, 10-bit color (Source signal delivered from Ultra HD Blu-ray as 4K @ 24Hz 4:2:2. Not compatible with HDR10 @ 60Hz.) |
PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby® Digital, DTS 5.1, Dolby Digital Plus™, Dolby TrueHD, DTS-HD Master Audio™, Dolby Atmos®, DTS:X |
32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz |
Up to 24-bit |
HDMI In/Out: 30 feet (10 meters) CAT5e/6: 330 feet (100 meters) CAT6a/7: 330 feet (100 meters) |
HDMI In/Out: 15 feet (5 meters) CAT5e/6: 230 feet (70 meters) CAT6a/7: 330 feet (100 meters) |
1x Type A, 19-pin, female, locking |
1x Mini Type B (firmware) |
1x 3-pin captive screw |
1x RJ45 |
LAN: 1x RJ45 Power: 1x 3-pin DC 48V |
15.2W (when paired with TX) |
100 – 240 V AC, 50/60 Hz (external supply) |
48 V DC, 0.83 A (external supply) |
32-122°F (0-50°C) |
20-90% non-condensing |
0.86 lb (0.39 kg) |
0.98" x 4.29" x 5" inches (25 x 109 x 127 millimeters) |
CE, FCC, cULus, RoHS, CCC, RCM (external supply) |
HDMI Compliance |
Video Resolution |
VESA Resolution |
Colorspace |
Chroma Subsampling |
Color Depth |
Video Processing |
Audio Pass Through |
Supported Sample Rates |
Audio Bit Depth |
Transmission Distance |
Transmission Distance - 4K/Ultra HD |
HDMI Connections |
USB Ports |
RS-232 Ports |
HDBaseT Connections |
Connectors |
Power Consumption |
Power Input |
Power Output |
Operating Temperature |
Operating Humidity |
Weight |
Dimensions (W x H x D) |
Certifications |
Support
Manuals and Guides
Support Documents
Third-Party Partner Warranty
We want to make our Third-Party Partner program as easy as possible. That’s why we process all claims directly, without any third party telephone tag. Specific warranty terms and details from the manufacturer are below. View the full Atlona® Warranty.
Keycap engravings
This feature is not currently optimized for mobile devices. We apologize for any inconvenience this may have caused. Please access Keycap engravings from a tablet or desktop computer.
