The Wall Mount Switch allows remote ON/OFF control of loads connected to the switch and is easily wired in place of a standard wall switch. The Switch integrates with other Nice North America Z-Wave-enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received, useful when a device would otherwise be out of radio range.
2GIG Z-Wave Smart Wall Switch
The Wall Mount Switch allows remote ON/OFF control of loads connected to the switch and is easily wired in place of a standard wall switch. The Switch integrates with other Nice North America Z-Wave-enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received, useful when a device would otherwise be out of radio range.
2GIG-WS15Z5-1 |
---|
Allows remote ON/OFF control of loads connected to the switch, and is easily wired in place of a standard wall switch |
Up to 100 feet line of sight between the wireless controller and/or the closest Z-Wave device |
Resistive: 15 amps (1800 watts) maximum, 120 VAC Motor: 1/2 H.P. maximum, 120 VAC Incandescent: 600W maximum, 120 VAC |
Z-Wave |
Range |
Maximum Load |
Distributed Brand Warranty
Information on the warranty coverage for this item is found on the manufacturer’s website. Snap One may assist you with a return in accordance with our Return Merchandise Authorization process found here, in so far as the process is in accordance with the manufacturer’s warranty. Specific warranty terms and details from the manufacturer are below.
Keycap engravings
This feature is not currently optimized for mobile devices. We apologize for any inconvenience this may have caused. Please access Keycap engravings from a tablet or desktop computer.