Close
Description
Specs
Support
Description
Description
The Atlona® AT-UHD-EX-70C-TX is an HDBaseT transmitter for HDMI transmission up to 230 feet (70 meters) over category cable with RS-232 and IR control.
Atlona® 4K/UHD HDMI over HDBaseT Transmitter with Control and PoE
The Atlona® AT-UHD-EX-70C-TX is an HDBaseT transmitter for HDMI transmission up to 230 feet (70 meters) over category cable with RS-232 and IR control. It transmits video signals up to 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling, plus embedded multi-channel audio. The AT-UHD-EX-70C-TX is HDCP 2.2 compliant and supports EDID communication. This HDBaseT transmitter is externally powered by the included power supply, making it ideal for extending AV and control directly to a projector with an HDBaseT input.
4K/UHD Capability @ 60 Hz with 4:2:0 Chroma Subsampling
- Supports 4K/60 4:2:0 and 4K/30 4:4:4
- Allows 4K/UHD transmission when used with a compatible HDBaseT-equipped display or HDBaseT receiver
HDCP 2.2 Compliant
- Adheres to latest specification for High-bandwidth Digital Content Protection
- Allows protected content stream to pass between devices
Supports 4K HDR10 @ 24 Hz
- Extends 4K HDR10 @ 24 Hz (4:2:0 chroma subsampling, 10-bit color)
Long Distance HDBaseT Extension
- Transmits AV and control up to 230 feet (70 meters) @ 1080p or 130 feet (40 meters) @ 4K/UHD using CAT6a/7 cable
- Uses easy-to-integrate category cable for low-cost, reliable system installation
Extends Bidirectional RS-232 and IR Control Signals
- Control signals travel over HDBaseT link to device for maximum control system flexibility
- Simplifies integration of source, control system, and display
Rear Panel I/O Connectors
- Placement of ports on rear panel simplifies wire management
- Saves installation time and eliminates clutter
Multi-Channel Audio Compliant
- Supports PCM, Dolby Digital, Dolby Digital Plus™, Dolby TrueHD, Dolby Atmos®, DTS Digital Surround™, DTS-HD Master Audio™, and DTS:X™
- Allows any multi-channel audio stream to be used within a professional audio system
Specs
Specifications
| AT-UHD-EX-70C-TX |
|---|
HDMI 2.0b, HDCP 2.2 |
4096×2160@24/25/30/50/60Hz, 3840×2160@24/25/30/50/60Hz, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480i NOTE: 4096×2160@50/60Hz & 3840×2160@50/60Hz supported @ chroma subsampli |
2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480 NOTE: All VESA resolutions are 60Hz. |
YCbCr, RGB |
4:4:4, 4:2:2, 4:2:0 |
8-bit, 10-bit, 12-bit |
4K HDR10 @ 24Hz, 4:2:0 chroma subsampling, 10-bit color (Source signal delivered from Ultra HD Blu-ray as 4K @ 24Hz 4:2:2. Not compatible with HDR10 @ 60Hz.) |
PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby® Digital, DTS 5.1, Dolby Digital Plus™, Dolby TrueHD, DTS-HD Master Audio™, Dolby Atmos® |
32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz |
Up to 24-bit |
HDMI In/Out: 30 feet (10 meters) CAT5e/6: 197 feet (60 meters) CAT6a/7: 230 feet (70 meters) |
HDMI In/Out: 15 feet (5 meters) CAT5e/6: 115 feet (35 meters) CAT6a/7: 130 feet (40 meters) |
1x Type A, 19-pin, female, locking |
1x Mini Type B (firmware) |
1x 3-pin captive screw |
1x RJ45 |
TX IR: 1x 4-pin captive screw Power: 1x 2-pin, 48V, captive screw |
10.89W |
100 – 240 V AC, 50/60 Hz (external supply) |
48 V DC, 0.83 A (external supply) |
32-122°F (0-50°C) |
20-90% non-condensing |
0.59 lb (0.27 kg) |
0.98" x 4.29" x 3.50" (25 x 109 x 89 millimeters) |
CE, FCC External Supply: CE, FCC, cULus, RoHS, CCC, RCM |
HDMI Compliance |
Video Resolution |
VESA Resolution |
Colorspace |
Chroma Subsampling |
Color Depth |
Video Processing |
Audio Pass Through |
Supported Sample Rates |
Audio Bit Depth |
Transmission Distance |
Transmission Distance - 4K/Ultra HD |
HDMI Connections |
USB Ports |
RS-232 Ports |
HDBaseT Connections |
Connectors |
Power Consumption |
Power Input |
Power Output |
Operating Temperature |
Operating Humidity |
Weight |
Dimensions (W x H x D) |
Certifications |
Support
Third-Party Partner Warranty
We want to make our Third-Party Partner program as easy as possible. That’s why we process all claims directly, without any third party telephone tag. Specific warranty terms and details from the manufacturer are below. View the full Atlona® Warranty.
Keycap engravings
This feature is not currently optimized for mobile devices. We apologize for any inconvenience this may have caused. Please access Keycap engravings from a tablet or desktop computer.
