Close
Description
Specs
Support
Description
Description
This Atlona HDBaseT™ receiver is made for AV signals up to 328 feet (100 meters) over category cable with Ethernet pass through, RS-232 and IR control, plus Power over Ethernet. It is compatible with signals up to 4K UltraHD @ 60Hz with embedded multi-channel audio and remote 48V power for the receiver.
Atlona® 4K Ultra HD HDBaseT Receiver - 328 ft
This Atlona HDBaseT™ receiver is made for AV signals up to 328 feet (100 meters) over category cable with Ethernet pass through, RS-232 and IR control, plus Power over Ethernet. It is compatible with signals up to 4K UltraHD @ 60Hz with embedded multi-channel audio and remote 48V power for the receiver. The receiver works with the PRO3-UHD Matrix Switcher Series to provide RS-232, and 12 volt-based IR control commands. The AT-UHD-EX-100CE-RX is HDCP 2.2 compliant and supports EDID communication. The receiver features a quarter rack width metal enclosures for installation with rear panel I/O ports for uncluttered wire management. Use with an optional AT-IR-CS-RX IR receiver cable to capture IR remote commands for AV system control.
4K UltraHD Capability and HDCP 2.2 Compliant
- Compatible with Ultra High Definition sources and displays
- Future proofs AV systems in preparation for technology improvements, 4K UltraHD streaming services and playback devices
- Adheres to latest specification for high-bandwidth Content Protection
- Allows protected content stream to pass between devices
Remote-Powered Receiver
- Industry standard IEEE 802.3af PoE for receiver is supplied by transmitter over HDBaseT
- Saves time and integration costs
- Receives 4K UltraHD video, audio, 100Base-T Ethernet, power, and control through a single cable
- Eliminates multiple cable runs between source, control system, router, and display
- Ethernet pass-through is not available on the AT-UHD-EX-100CE-RX receiver when used with the UHD-PRO3 Series matrix switchers
Extended Distance HDMI Extension
- Receives HDMI signals up to 328 ft (100m) @ 1080P with CAT5e/6 or 4K UltraHD using CAT6a/7 cable
- Uses easy-to-integrate category cable for low-cost, reliable system installation
Field Updatable Firmware
- Front panel USB port provides an easy means for kit upgrades
- Ensures long term system return on investment
Bidirectional IR Control Capabilities
- IR Input designed to work with 12V IR receivers for source control
- Saves control systems costs
- Placement of ports on rear panel simplifies wire management
- Saves installation time and eliminates clutter
- LED indicators provide power and HDBaseT link status information
- Provides easy setup and troubleshooting
Specs
Specifications
| AT-UHD-EX-100CE-RX |
|---|
Supports up to 2.2 |
PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos |
CAT5e/6 @ 4K - up to 70 meters/230 ft CAT6a/7 @ 4K - up to 100 meters/328 ft CAT5e/6 @ 1080p - up to 100 meters/328 ft HDMI IN/OUT @ 4K - up to 5 meters/15 ft HDMI IN/OUT @ 1080p - up to 10 meters/30 ft |
10.2 Gbps |
CE, FCC |
Firmware - Mini-B USB
HDBaseT - RJ45 (8P8C)
HDMI - Type A
IR - 5-pin captive screw
RS-232 - 3-pin captive screw
Power - 2-pin, 48V captive screw LAN - RJ45 (8P8C), Ethernet pass through |
With Ears: 4.69" x 1.06" x 3.5" Without Ears: 4.29" x .98" x 3.5" |
20 to 90% non-condensing |
32°F to 122°F |
15.2W |
AC100~240V 50/60Hz |
-4°C to 140°F |
.86 lb |
4096×2160@24/25/30/50*/60Hz*, 3840×2160@24/25/30/50*/60Hz*, 2048x1080p,1080p@23.98/24/25/29.97/30/50/59.94/60Hz,1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480i |
2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480 |
32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz |
up to 24-bit |
YCbCr, RGB |
4:4:4, 4:2:2, 4:2:0 |
8-bit, 10-bit, 12-bit |
Pass through |
HDCP Compliance |
Supported Formats |
Transmission Distance |
Supported Video Bandwidth |
Certifications |
Connectors |
Dimensions (W x H x D) |
Operating Humidity |
Operating Temperature |
Power Consumption |
Line Voltage |
Storage Temperature |
Weight |
Supported Resolutions |
VESA Resolution |
Supported Sample Rates |
Bit Rate |
Colorspace |
Chroma Subsampling |
Color Depth |
CEC |
Support
Third-Party Partner Warranty
We want to make our Third-Party Partner program as easy as possible. That’s why we process all claims directly, without any third party telephone tag. Specific warranty terms and details from the manufacturer are below. View the full Atlona® Warranty.
Keycap engravings
This feature is not currently optimized for mobile devices. We apologize for any inconvenience this may have caused. Please access Keycap engravings from a tablet or desktop computer.
