When installing fixed monitor mounts, identify the wall construction, locate suitable structural framing, and select fasteners rated for the wall and display load rather than relying on drywall alone. Some low-profile designs attach to a single stud, while others use a wall rail across two studs, so confirm the mount’s installation method and allow clearance for wiring, outlets, and display connections.

Fixed monitor mounts in this assortment sit about 0.6 to 1.18 inches from the wall, depending on the mount, so check the display’s cable connectors and required bend radius before installation. Open or low-profile designs can help accommodate outlets and in-wall connections, but recessed boxes or angled cables may require additional wall clearance.

Look for fixed monitor mounts with post-install leveling screws, which allow small adjustments after installation, plus reversible wall plates and center-bolt notches that help position and temporarily hang the mount. Lockable tabs or pull cords can secure the display to the mount, while open-back designs leave room around outlets and wiring.

Standard fixed monitor mounts typically provide a little more space behind the display for mounting hardware, post-install leveling, and locking features, while keeping the screen close to the wall. Low-profile fixed monitor mounts sit closer to the wall, with select designs offering a minimal back plate or single-stud installation to help accommodate wiring and in-wall connections.