Close
Atlona® 4K/UHD HDMI HDBaseT TX/RX with Ethernet, Control, PoE, and Return Optical Audio
AT-UHD-EX-100CEA-KIT
Description
Specs
Support
Description
Description
The Atlona® AT-UHD-EX-100CEA-KIT is an HDBaseT transmitter/receiver kit for HDMI transmission up to 330 feet (100 meters) over category cable with Ethernet pass through, RS-232 and IR control, Power over Ethernet (PoE), and optical audio from receiver to transmitter.
Atlona® 4K/UHD HDMI HDBaseT TX/RX with Ethernet, Control, PoE, and Return Optical Audio
The Atlona® AT-UHD-EX-100CEA-KIT is an HDBaseT transmitter/receiver kit for HDMI transmission up to 330 feet (100 meters) over category cable with Ethernet pass through, RS-232 and IR control, Power over Ethernet (PoE), and optical audio from receiver to transmitter. This extender kit transmits video signals up to 4K/UHD @ 60Hz, 8-bit color, 4:2:0 chroma subsampling with embedded multi-channel audio and remote 48V power for the receiver. A digital audio pathway returning back across the HDBaseT link from a smart TV to an AVR routes multi-channel audio using TOSLINK optical connectors. Additionally, this kit extends Ethernet, RS-232, and 12-volt based IR control commands. This kit is HDCP 2.2 compliant and supports EDID communication. Both transmitter and receiver feature one-third rack width metal enclosures for easy rack mounting with rear panel I/O ports for uncluttered wire management.
4K/UHD Capability
- Compatible with Ultra High Definition sources and displays
- Full support of 4K/UHD streaming services and playback devices
HDCP 2.2 Compliant
- Adheres to latest specification for High-bandwidth Content Protection
- Allows protected content stream to pass between devices
Supports 4K HDR10 @ 24 Hz
- Extends 4K HDR10 @ 24 Hz (4:2:0 chroma subsampling, 10-bit color)
Receiver to Transmitter Digital Audio Pathway
- Routes multi-channel audio from TV to AVR on same extender and cable as video from set top box to TV
- Eliminates extra cable needed to bring high quality audio from embedded TV apps
Ethernet, RS-232, and Bidirectional IR
- No additional control cables required
- Saves time and money during installation
Remote-Powered Receiver
- Industry standard IEEE 802.3af PoE for receiver is supplied by transmitter over HDBaseT
- Saves time and integration costs
Extended Distance HDMI Extension
- Transmits HDMI signals up to 330 ft (100m) @ 1080P with CAT5e/6 or 4K/UHD using CAT6a/7 cable
- Uses easy-to-integrate category cable for low-cost, reliable system installation
Specs
Specifications
| AT-UHD-EX-100CEA-KIT |
|---|
HDMI 2.0b, HDCP 2.2 |
4096×2160@24/25/30/50/60Hz, 3840×2160@24/25/30/50/60Hz, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480i NOTE: 4096×2160@50/60Hz & 3840×2160@50/60Hz supported @ chroma subsampli |
2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480 NOTE: All VESA resolutions are 60Hz. |
YUV, RGB |
4:4:4, 4:2:2, 4:2:0 |
8-bit, 10-bit, 12-bit |
4K HDR10 @ 24Hz, 4:2:0 chroma subsampling, 10-bit color (Source signal delivered from Ultra HD Blu-ray as 4K @ 24Hz 4:2:2. Not compatible with HDR10 @ 60Hz.) |
PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby® Digital, DTS 5.1, Dolby Digital Plus™, Dolby TrueHD, DTS-HD Master Audio™, Dolby Atmos®, DTS:X® |
32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz |
Up to 64-bit |
HDMI In/Out: 30 feet (10 meters) CAT5e: 330 feet (100 meters) CAT6/6a/7: 330 feet (100 meters) |
HDMI In/Out: 15 feet (5 meters) CAT5e: 295 feet (90 meters) CAT6/6a/7: 330 feet (100 meters) |
Transmitter: LAN - 1x RJ45; Optical Audio - 1x TOSLINK; Power - 48V, 2-pin captive screw Receiver: LAN - 1x RJ45; Optical Audio - 1x TOSLINK |
Transmitter: 1x Type A, 19-pin, female, locking Receiver: 1x Type A, 19-pin, female, locking |
Transmitter: 1x Mini Type B (firmware); Receiver: 1x Mini Type B (firmware) |
Transmitter: 1x 5-pin captive screw Receiver: 1x 6-pin captive screw |
Transmitter: 1x RJ45 Receiver: 1x RJ45 |
20.61W (when TX and RX are paried) |
100 – 240 V AC, 50/60 Hz (external supply) |
48 V DC, 0.83 A (external supply) |
32-122°F (0-50°C) |
20-90% non-condensing |
Transmitter: 1.02" x 5.75" x 3.5" (26 x 146 x 89 millimeters) Receiver: 1.02" x 5.75" x 3.5" (26 x 146 x 89 millimeters) |
Transmitter: 0.89 lb (0.402 kg) Receiver: 0.87 lb (0.396 kg) |
CE, FCC External Supply: CE, FCC, cULus, RoHS, CCC, RCM |
HDMI Compliance |
Video Resolution |
VESA Resolution |
Colorspace |
Chroma Subsampling |
Color Depth |
Video Processing |
Audio Pass Through |
Supported Sample Rates |
Audio Bit Depth |
Transmission Distance |
Transmission Distance - 4K/Ultra HD |
Connectors |
HDMI Connections |
USB Ports |
RS-232 Ports |
HDBaseT Connections |
Power Consumption |
Power Input |
Power Output |
Operating Temperature |
Operating Humidity |
Dimensions (W x H x D) |
Weight |
Certifications |
Support
Manuals and Guides
Third-Party Partner Warranty
We want to make our Third-Party Partner program as easy as possible. That’s why we process all claims directly, without any third party telephone tag. Specific warranty terms and details from the manufacturer are below. View the full Atlona® Warranty.
Keycap engravings
This feature is not currently optimized for mobile devices. We apologize for any inconvenience this may have caused. Please access Keycap engravings from a tablet or desktop computer.
