Close
Description
Specs
Description
Description
The Control4 DIN-Rail 8-Channel Adaptive Phase Dimmer controls up to eight loads from one module in the Control4 system. It is an adaptive phase dimmer, so each channel supports a variety of load types including incandescent, halogen, electronic low-voltage (solid-state) transformer, magnetic (iron core) low-voltage transformer, fluorescent, compact fluorescent, LED, and motor. The DIN-Rail 8-Channel Adaptive Phase Dimmer automatically detects the load type and sets the appropriate dimming mode.
Control4® Centralized 8-Channel Adaptive Phase Dimmer
The Control4 DIN-Rail 8-Channel Adaptive Phase Dimmer controls up to eight loads from one module in the Control4 system. It is an adaptive phase dimmer, so each channel supports a variety of load types including incandescent, halogen, electronic low-voltage (solid-state) transformer, magnetic (iron core) low-voltage transformer, fluorescent, compact fluorescent, LED, and motor. The DIN-Rail 8-Channel Adaptive Phase Dimmer automatically detects the load type and sets the appropriate dimming mode.
Features
- Controls up to eight loads and supports a variety of load types
- Each channel can be set to different dimming modes including Switch mode, Forward Phase mode, Reverse Phase mode, and Autodetect mode
- Channel buttons allow for toggling on/off or ramping up/down a load
- Channel Status LEDs indicate whether a load is on, off, or in short-circuit fault
- Module Override button allows toggling between the module override scene and all channels off or setting the module override scene to current channel levels
- Module Status LED indicates if module power is on with normal operation, off, or in thermal overload
- Link/Activity LED indicates system link status, communication activity, or firmware update status
- Reset button can be used for factory default or network configuration settings
- Auxiliary override connection allows a standard line-voltage toggle switch to control the attached lights before the control system is installed or in case the controller malfunctions
- Module can be installed in either a Control4 5- or 2-slot panel or a third-party DIN rail panel
- California Title 20 compliant (see ctrl4.co/title20 for more information on Title 20 / Title 24 compliance)
Specs
Specifications
| C4-DIN-8APD-E |
|---|
Module |
100-277VAC, 50/60Hz UL Certified 240VAC, 50Hz CE Certified |
1 or 2 |
5W |
100-277V |
Incandescent, halogen, electronic low-voltage transformer (ELV), magnetic (iron core) low-voltage transformer (MLV)*, fluorescent, compact fluorescent, LED, motor |
Ethernet |
(2), 1 Ethernet in, 1 Ethernet passthrough |
Refer to the Data Sheet |
4.5 x 8.6 x 2.2" (115 x 219 x 57 mm) |
0° C to 40° C (32° F to 104° F) |
-20° C to 60° C (-4° F to 140° F) |
1.2 g (2.7lb) Shipping: 1.4 g (3.2 lb) |
175 BTU/hr @ 120VAC |
12M |
5% to 95% non-condensing |
Application |
Power Requirements |
Line in (circuits) |
Power Consumption |
Voltage |
Supported Load Types |
Control Communications |
RJ-45 Ports |
Load Rating |
Dimensions (W x H x D) |
Operating Temperature |
Storage Temperature |
Weight |
Thermal Dissipation (heat losses) |
DIN Module Width |
Humidity |
Limited Hardware Warranty
Control4 warrants its hardware product to be free from defects in material and workmanship during the warranty period. If the hardware proves to be defective in material or workmanship during the warranty period, Control4 will, at its sole option, repair or replace the product with a like product. The warranty extends only to products purchased directly from Control4 Corporation or an Authorized Control4 Dealer. For complete limited warranty information, including details on purchaser legal rights as well as limited warranty exclusions, visit here.
Keycap engravings
This feature is not currently optimized for mobile devices. We apologize for any inconvenience this may have caused. Please access Keycap engravings from a tablet or desktop computer.
