Close
Description
Specs
Description
Description
The Control4 DIN-Rail 8-Channel Relay Switch controls up to eight high in-rush loads from one module in the Control4 system. Each channel supports a variety of load types, including incandescent, halogen, electronic low-voltage transformers, magnetic low-voltage transformers, fluorescents, compact fluorescents, LEDs, and motors.
Control4® DIN-Rail 8-Channel Relay V2
The Control4 DIN-Rail 8-Channel Relay Switch controls up to eight high in-rush loads from one module in the Control4 system. Each channel supports a variety of load types, including incandescent, halogen, electronic low-voltage transformers, magnetic low-voltage transformers, fluorescents, compact fluorescents, LEDs, and motors.
Features
- Controls up to eight high in-rush loads
- Channel buttons allow for toggling a load on/off
- Channel status LEDs indicate whether a load is on or off
- Module Override button allows toggling between the module override scene and all channels off or setting the module override scene to to the current channel's on/off settings
- Module Status LED indicates if module power is on with normal operation, off, or in thermal overload
- Link/Activity LED indicates system link status, communication activity, or firmware update status
- Reset button can be used for restoring factory defaults or network configuration settings
- Auxiliary override connection allows a standard line-voltage toggle switch to control the attached lights before the control system is installed or in case the controller malfunctions
- Module can be installed in either a Contro4 5- or into a 2-slot panel or into a third-party DIN rail panel
Specs
Specifications
| C4-DIN-8RELSW-E |
|---|
Module |
2 years |
100-277VAC, 50/60 Hz UL Certified 240VAC, 50 Hz CE Certified |
100-277V |
4 |
3.5W |
Incandescent, halogen, electronic low-voltage transformers (ELV), magnetic low voltage transformers (MLV), fluorescents, compact fluorescents, LEDs, motors |
Ethernet |
Refer to the Data Sheet |
19 (Line 1, Line 2, Line 3, Line 4, Neutral 1, Neutral 2, Neutral 3, Neutral 4, Earth Ground, Loads 1-8, Aux In, Aux Out) |
One 26 AWG to 12 AWG (0.12 mm² to 2.5 mm²) per terminal |
(2) 1 Ethernet in, 1 Ethernet passthrough |
32° F to 104° F (0°C to 40°C) |
5% to 95% non-condensing |
-4°F to 158°F (-20°C to 70°C) |
10 BTU/hr @120VAC |
4.5 x 8.6 x 2.2 in. (115 x 219 x 57 mm) |
12M |
2.9 lbs (1.3 kg) Shipping: 3.3 lbs (1.4 kg) |
Application |
Warranty |
Power Requirements |
Voltage |
Line feeds (circuit) |
Power Consumption |
Supported Load Types |
Control Communications |
Load Rating |
Line Voltage |
Recommended Wire Gauge |
RJ-45 Ports |
Operating Temperature |
Operating Humidity |
Storage Temperature |
Thermal Dissipation (heat losses) |
Dimensions (W x H x D) |
DIN Module Width |
Weight |
Exclusive Brand Warranty
This product has a Limited Warranty, subject to the terms and conditions of the ADI Exclusive Brands Limited Hardware Warranty Click Here.
Keycap engravings
This feature is not currently optimized for mobile devices. We apologize for any inconvenience this may have caused. Please access Keycap engravings from a tablet or desktop computer.
