Close
70V Amplifiers
AT-HDR-CAT-2
- Complete Distribution: One HDMI® input and two HDBaseT™ outputs
- Display Range: Extend 4K/60 4:4:4 up to 130’ (40 m)
AT-HDR-CAT-4
- Complete Distribution: One HDMI® input and two HDBaseT™ outputs
- Display Range: Extend 4K/60 4:4:4 up to 130’ (40 m)
AT-HDR-CAT-8
- Complete Distribution: One HDMI® input and two HDBaseT™ outputs
- Display Range: Extend 4K/60 4:4:4 up to 130’ (40 m)
- Two-Input mixer amplifier
- 2 x 25 W (stereo) or 1 x 50 W (bridged) at 4/8 ohms output
AT-GAIN-VOL
- Volume control wallplate for use with the AT-GAIN-M50-LZ mixer amplifier
- Provides easy-to-use manual audio level control for the amplifier when a control system is not in use
- Electro-mechanical relays; infinite Attenuation
- Digital to Analog Conversion (DACs); 24-bit delta-sigma at 48 or 96kHz sAle rate
- 10 m (30') minimum, typical range is 15 - 23m (50 - 75')
- RF filtered line level, input source software selectable
QSC-UNDX2IO-PLUS
- Dante Domain Manager ready
- Small form factor allows for easy co-location near analog sources or sinks
- Balanced (nominal) 10 K Ohms
- Unbalanced (nominal) 10 K Ohms
- The right I/O where you need it
- Audio I/O model
QSC-QIO-ML2X2
- The right I/O where you need it
- Audio I/O model
QSC-QIO-ML4I
- The right I/O where you need it
- Audio I/O model
QSC-QIO-S4
- Native network Serial connectivity solution for Q-SYS
- One port includes RS422 and RS485 compatibility
- Dante Domain Manager ready
- Four balanced XLR mic/line inputs
ECA-70VMINI-60W
- IR and RS232 Control
- Single Channel, 60 Watts at 70V
ESA-70V2CH-150W
- OvrC-enabled
- IR, RS-232, IP, URC and Control4 drivers
- Available in 150-, 300-, or 500-watt options
ESA-70V2CH-300W
- OvrC-enabled
- IR, RS-232, IP, URC and Control4 drivers
- Available in 150-, 300-, or 500-watt options
ESA-70V2CH-500W
- OvrC-enabled
- IR, RS-232, IP, URC and Control4 drivers
- Available in 150-, 300-, or 500-watt options
EA-AMP-HYB-2D-1000
- Preset DSP Settings and Customizable EQs
- Amp supports hybrid 70V/8-ohm systems
EA-AMP-HYB-2D-2000
- Preset DSP Settings and Customizable EQs
- Amp supports hybrid 70V/8-ohm systems
