Close
Control4® Vibrant Connector Block with 6ft (1.8m) Two-Wire (5-Pack)
Description
Specs
Description
Description
Vibrant tape light easily connects to another segment of tape light with the Connector Blocks to extend the run in just a couple of simple steps. Align the polarity of the two pieces of tape light, use the emery board to scrape off a small amount of the nano-coating that covers the conductors where the two pieces of tape light will connect, then close the clamshell connector until it snaps into place.
Connector Block Two-Wire (5-Pack)
Vibrant tape light easily connects to another segment of tape light with the Connector Blocks to extend the run in just a couple of simple steps. Align the polarity of the two pieces of tape light, use the emery board to scrape off a small amount of the nano-coating that covers the conductors where the two pieces of tape light will connect, then close the clamshell connector until it snaps into place.
Features
- Connector Blocks available with 2-wire leads (fixed color or warm dimming), or none without leads
- IP20 rated connector compatible with IP54 Vibrant tape light
- Dimensions for 2- and 4-wire connectors (H x W x D): 1/2in (12mm) by 1/2in (12mm) by 0.3in (7mm)
Specs
Specifications
| C4-LCB5-2WL | C4-LCB5-2W |
|---|---|
5 years |
5 years |
1-Channel |
1-Channel |
Connector |
Connector |
Warranty |
Channels |
Application |
Exclusive Brand Warranty
This product has a Limited Warranty, subject to the terms and conditions of the ADI Exclusive Brands Limited Hardware Warranty Click Here.
Keycap engravings
This feature is not currently optimized for mobile devices. We apologize for any inconvenience this may have caused. Please access Keycap engravings from a tablet or desktop computer.
