Close
Description
Specs
Description
Description
Use this extrusion for in-wall accent lighting to set the mood, change the ambiance, and provide general lighting. With its large flanges, this extrusion creates fewer seams, efficient installations, and is perfect for mud-in applications. Create a linear effect in the wall with fixed color, warm dimming, fully tunable, RGBW, or RGBTW linear lighting.
Universal Outdoor Extrusion
Use this extrusion for in-wall accent lighting to set the mood, change the ambiance, and provide general lighting. With its large flanges, this extrusion creates fewer seams, efficient installations, and is perfect for mud-in applications. Create a linear effect in the wall with fixed color, warm dimming, fully tunable, RGBW, or RGBTW linear lighting.
Important Note - To prevent spotting and provide a seamless line of light, it is recommended to install 10mm LED tape on the side walls of the channel instead of the floor.
Features
- LED tape light should be installed on side walls of the extrusion
- Designed for 1/2” drywall mud-in installation
- Frosted lens protects the light source while evenly diffusing light
- Lightweight anodized aluminum extrusion provides excellent heat dissipation
- Field cuttable extrusion and lens
- End caps available for a tailored look
- Compatible with 10-12mm wide tape light (all indoor SKUs)
- Dimensions (H x W): 7/8" (22mm) by 4-27/32" (12.825mm) with an internal channel floor width of 1-1/2" (38mm) and side wall height of 25/64" (10mm)
Specs
Specifications
| C4-LEEL3-IW-F-6F |
|---|
5 years |
Extrusion |
Warranty |
Application |
Exclusive Brand Warranty
This product has a Limited Warranty, subject to the terms and conditions of the ADI Exclusive Brands Limited Hardware Warranty Click Here.
Keycap engravings
This feature is not currently optimized for mobile devices. We apologize for any inconvenience this may have caused. Please access Keycap engravings from a tablet or desktop computer.
