Experience redefined audio with the Denon PMA-3000NE amplifier. Delivering 160W per channel at 4 ohms/80W per channel at 8 ohms, this powerful amp drives even the most demanding speakers with clarity. With versatile digital connections, 384kHz/32-bit support, Pure Analog Mode, and an MM/MC phono stage, it delivers superior sound in almost any scenario.
A UHC-MOS single push-pull circuit and differential 2-stage amplifier drive demanding speakers with exceptional clarity and linearity. Providing 160W/channel into 8 ohms and 80W/channel into 4 ohms, this advanced design offers increased efficiency, low distortion, and enhanced power handling.
Unlock a vinyl collection’s full potential with the PMA-3000NE's high-performance phono stage, which supports both MM and MC cartridges for the truest sound in almost any setup. A high-gain design and “simple and straight” circuitry minimize distortion, delivering the pure sound of vinyl with warmth and depth.
Ultra AL32 Processing analog waveform reproduction technology uses data interpolation to achieve smooth high-resolution output, with a waveform that closely matches the original. These algorithms support input signal resolution up to 384kHz/24-bit, reproducing richly detailed, expressive sound that’s faithful to the source.
Versatile digital connections integrate users computer, media players, and other sources. Optical and coaxial inputs support 192kHz/24-bit audio and a USB Type B input supports up to 32-bit/384kHz or 11.2 MHz DSD, reproducing high-resolution sound with a wide dynamic range.
Pure Analog mode bypasses digital circuitry for a pure, all-analog sound. A Source Direct function bypasses the tone controls so that the signal path is as short and clean as possible, for enhanced clarity.
Each Denon product is tuned by Shinichi Yamauchi, the Denon Sound Master, to provide the truest sonic reproduction, so you can trust that users experience their favorite music exactly as the artist intended.
DEN-PMA-3000NE |
---|
160W + 160W |
80W + 80W |
0.01 % (Rated output: –3 dB), 8 ohm/ohms, 1 kHz |
400W |
2 |
(8 ohm,20 Hz-20 kHz,THD 0.07%) |
54.2 lbs |
434 × 182 × 443 mm |
Power Output @ 4 ohm |
Power Output @ 8 ohm |
Total Harmonic Distortion (THD) |
Power Consumption |
Channels |
Frequency Response |
Weight |
Dimensions (W x H x D) |
Information on the warranty coverage for this item is found on the manufacturer’s website. Snap One may assist you with a return in accordance with our Return Merchandise Authorization process found here, in so far as the process is in accordance with the manufacturer’s warranty. Specific warranty terms and details from the manufacturer are below.
This feature is not currently optimized for mobile devices. We apologize for any inconvenience this may have caused. Please access Keycap engravings from a tablet or desktop computer.