The ProAudio1632 DSP Pre-Amp Audio Matrix features 40 audio inputs alongside 32 analog outputs and 32 digital outputs, enabling simultaneous audio distribution to multiple zones. Each output zone can be enhanced with built-in features including 5 band equalizer on each zone, adjustable volume and gain settings, subwoofer control, serial and TCP/IP control, lip sync delay and much more.
The ProAudio1632 DSP Pre-Amp Audio Matrix features 40 audio inputs alongside 32 analog outputs and 32 digital outputs, enabling simultaneous audio distribution to multiple zones. Each output zone can be enhanced with built-in features including 5 band equalizer on each zone, adjustable volume and gain settings, subwoofer control, serial and TCP/IP control, lip sync delay and much more.
ProAudio has been designed for the custom install AV market, in many cases the need for an audio receiver can be eliminated by using the audio features of the ProAudio™ Series.
The ProAudio™ series provides maximum sound control including bass, treble and a 5 band graphic equalizer available for each zone. Audio and tone control is fully adjustable.
To balance the different levels of audio coming from different pieces of equipment, each audio input has a full range gain adjustment.
With low pass and high pass filter settings adjustable from 50Hz to 300Hz. ProAudio provides easily adaptable subwoofer control.
The doorbell connections on the reverse of the system provides the ability to connect doorbell/pager inputs to any output zone and to automatically lower the current volume and push through the doorbell/pager signal. This can also be adapted for fire/evacuation messages.
For muted audio or the lowest possible distortion, by mirroring the analog outputs to the digital outputs, you can input and output digital audio, completely bypassing the analog sections. No extra conversions are required and you still have volume, balance, bass, treble and 5 band equalizer controls.
Whether your audio comes in through the analog inputs, digital coax inputs or digital optical inputs, all inputs can be converted to analog to provide full flexibility.
For hallways, and outdoor speakers, where stereo is not particularly useful, each zone can be mixed from stereo to mono using a variety of different methods.
When moving audio around, lip sync can often be an issue. Within each ProAudio system, we provide up to 170ms of lip sync delay so that your audio/video matches up.
Link as many output zones as you wish to create a group of outputs that all automatically switch simultaneously to the same input source.
To simplify the installation process, each ProAudio product has an SDDP ID trigger button that alerts a compatible control system to the product’s presence on the network for easy configuration.
P8-PROAUDIO1632 |
---|
5U |
16x Stereo L/R, 8x Optical, 16x Digital Coax |
32x Stereo L/R, 32x Digital Coax |
12x Outputs |
Doorbell/Paging: 2x Inputs Lip Sync Blue: Up to 170ms per zone and/or per input |
+24dB to -99.5dB, and full mute (-115dB), with 0.5dB step resolution. Individual zone and master (all zones) control Bass Range: -20db to +20db, 0.5db steps Treble Range: -20db to +20db, 0.5db steps Equalizer: 5 Band EQ per zone |
Subwoofer: 5 Band EQ per zone Input Gain: -24dB to +24dB Output Gain: -24dB to +24dB |
Coax Input Levels: 200mV - 7.0V (PC card compatible) Coax Output Level: 500mV nominal into 75 ohms |
5Hz - 20kHz @+/-0.1dB S.N. |
> 85dB, 5Hz-20kHz |
10K Ohms |
Modes: PCM, Dolby Digital 5.1, DTS. (multi-channel modes are pass thru only, the switches do not downmix) Format Conversion: Yes - Digital to Analog audio supported. (both digital and analog audio outputs are available simultaneously) |
1 x RJ45 (TCP/IP control only) |
1x DB9 (control only) |
5 to 90% RH (no condensation) |
0 to +35°C (32 to +95°F) |
-20°C to 60°C (-4°F to 140°F) |
IEC C14 socket |
110-240V, 1.0A, 50/60Hz |
UKCA, CE, FCC (SDoC), RoHS |
Rack mounting accessories, Power cable |
Control 4, Elan, Savant, Crestron, RTI |
11.81" x 12.60" x 17.32" |
8.10 lb |
22.83" x 14.72" x 5.12" |
P8-PROAUDIO32 |
Rack Spacing |
Inputs |
Outputs |
12V Trigger |
Features |
Audio Outputs Volume Range |
Controls |
Power Handling |
Frequency Response |
Signal to Noise Ratio |
Impedance Input |
Audio Features |
Ethernet Ports |
RS-232 Ports |
Operating Humidity |
Operating Temperature |
Storage Temperature |
Power Input |
Power Rating |
Certifications |
Included Accessories |
Driver |
Dimensions (W x H x D) |
Weight |
Box Dimensions |
Comparable Products |
We want to make our Distributed Brand program as easy as possible. That’s why we process all claims directly, without any third party telephone tag. Specific warranty terms and details from the manufacturer are below.
Pulse-Eight operate from their own design, R&D and manufacturing facility in Britain giving the unique opportunity to fully manage the entire production process, ensuring the very best products. However, from time to time things do go wrong therefore every Pulse-Eight system is backed by a 3-year warranty that will cover all parts and labour should anything go wrong.
Contact your Snap AV representative for more information.
This feature is not currently optimized for mobile devices. We apologize for any inconvenience this may have caused. Please access Keycap engravings from a tablet or desktop computer.