Close
RTI 10-210860-18 DSP Matrix Amplifier AMP-4-125, 4-Channel 125W or 2-Channel 100V / 250W
RTI-8G-102108601
Click to enlarge
Description
Specs
Support
Description
Description
The AMP-4-125 power amplifier delivers configurable and reliable high-performance audio power amplification for commercial and hospitality applications requiring a mix of low-impedance and high-impedance outputs. Featuring a compact 1U half-rack design, this DSP-enabled Class-D amplifier supports low-impedance 4ohms to 16ohms loudspeakers and high-impedance 70/100V transformer-coupled loudspeakers. The AMP-4-125 accepts 4 analog inputs and one stereo S/PDIF digital input, delivering four low impedance mono channels (or two low impedance stereo zones) at 125W per channel or two 70/100V mono channels at 250W per channel. For setup, the RTI web GUI offers effortless browser-based configuration of the installed system. DSP Configuration options include multi-zone setup, input mixing, priority and ducking, restrictions, input and output EQ, S/PDIF output routing, high-pass filtering, speaker presets, delay, Wall-S1 controller configuration, sine wave generation and more.
RTI 10-210860-18 DSP Matrix Amplifier AMP-4-125, 4-Channel 125W or 2-Channel 100V / 250W
The AMP-4-125 power amplifier delivers configurable and reliable high-performance audio power amplification for commercial and hospitality applications requiring a mix of low-impedance and high-impedance outputs. Featuring a compact 1U half-rack design, this DSP-enabled Class-D amplifier supports low-impedance 4ohms to 16ohms loudspeakers and high-impedance 70/100V transformer-coupled loudspeakers. The AMP-4-125 accepts 4 analog inputs and one stereo S/PDIF digital input, delivering four low impedance mono channels (or two low impedance stereo zones) at 125W per channel or two 70/100V mono channels at 250W per channel. For setup, the RTI web GUI offers effortless browser-based configuration of the installed system. DSP Configuration options include multi-zone setup, input mixing, priority and ducking, restrictions, input and output EQ, S/PDIF output routing, high-pass filtering, speaker presets, delay, Wall-S1 controller configuration, sine wave generation and more.
- 4-Analog audio source input channels (balanced or unbalanced) and one digital input (S/PDIF)
- Two Lo-Z stereo or four Lo-Z mono output zones, two Hi-Z mono output zones or a mix of them
- A Class D amplifier provides a robust and clear audio experience with 125W at 4/8 Ohms per channel or 250W at 70/100V per channel
- Daisy-chain multiple amplifiers to expand the number of zones by distributing up to 2 audio inputs or zones
- Built-in DSP allows fine-tuning of acoustic characteristics for each zone
- Easy configuration via LAN or Wi-Fi
- Offers IP and GPIO control options
- Free-standing installation or rack-mount (rack-mount kit included)
Specs
Specifications
| RTI-8G-102108601 |
|---|
20 Hz – 20 kHz (+/- 0.5 dB, 8Ω load, 3 dB below rated power) |
12.6” x 8.66” x 1.75” |
Rack mount or free-standing |
+32°F to +104°F (0°C to +40°C) |
6.2 lb (2.8 kg) |
UREC™ universal mains switch mode power supply with Power Factor Correction (PFC) and standby converter |
Frequency Response |
Dimensions (W x H x D) |
Mounting |
Operating Temperature |
Weight |
Power Supply |
Support
Support Documents
Distributed Brand Warranty
Information on the warranty coverage for this item is found on the manufacturer’s website. Snap One may assist you with a return in accordance with our Return Merchandise Authorization process found here, in so far as the process is in accordance with the manufacturer’s warranty. Specific warranty terms and details from the manufacturer are below.
Keycap engravings
This feature is not currently optimized for mobile devices. We apologize for any inconvenience this may have caused. Please access Keycap engravings from a tablet or desktop computer.
