Contemporary lighting accessories can support upgrades to compatible existing smart lighting systems by replacing switches and using the property’s current wiring, allowing installers to add devices incrementally. Use the matching Contemporary faceplate, since these devices are not compatible with Decora-style faceplates, and confirm wiring requirements such as a neutral wire before installation.

Select faceplates designed for contemporary lighting controls, since these devices use their own faceplate style rather than standard Decora-style faceplates. For multi-gang installations, consider a combo faceplate when pairing a Decora-style device with a contemporary control in the same electrical box, and choose a color or finish that coordinates with the installation.

Use a switch for on/off control of lighting, outlets, motors, or other supported loads when dimming is not required, and use a standard dimmer for compatible loads when the installation calls for adjustable light levels. Choose a 0-10V dimmer for compatible four-wire 0-10V or 1-10V dimmable fluorescent ballasts and LED lights, and verify the load requirements and neutral-wire needs before installation.

Review whether the device is rated for 120/277 volts or 240 volts, and confirm that the circuit voltage matches the selected switch or dimmer. Check the load type, such as LED, incandescent, halogen, electronic or magnetic low-voltage, fluorescent, or motor loads, and plan for a neutral wire because the listed switches and dimmers require one.