IP cameras with Power over Ethernet (PoE) require Ethernet cabling and an active PoE connection, such as a compatible PoE-enabled network video recorder (NVR), switch, or injector, to provide network data and power. A router or network switch connects the cameras to the local network for viewing and management, while an NVR or supported local microSD storage can record video.

IP cameras with Power over Ethernet connect to a network video recorder through a Category cable that carries both network data and electrical power. Connect each camera to an active PoE port on a compatible NVR, PoE switch, or injector, then configure the recording system to recognize the camera and manage live video and recordings.

Choose a fixed-lens IP camera with Power over Ethernet (PoE) for a consistent viewing area, or select a varifocal lens when you need adjustable framing, zoom, or focus during installation. Dome cameras offer a low-profile form factor, while bullet cameras provide a more visible, directional design that can suit outdoor mounting and longer viewing areas.

Yes, IP cameras with Power over Ethernet can support local storage on a micro SD card while also sending video to a centralized network video recorder (NVR). This setup gives installers flexible recording options, including standalone camera operation, centralized management, or both, depending on the camera and system configuration.