Match the connector’s wire count and lighting function to the strip: two wires for fixed-color or warm-dimming tape light, four wires for fully tunable tape light, five wires for RGBW, and six wires for RGBTW. Also verify the connector matches the strip’s environmental rating, such as an IP20 connector for IP54 tape light or an IP67 outdoor connector for IP67 tape light, and align polarity before closing the connector.

Use a connector with a lead when you need wire length between linear lighting segments, such as when routing around a corner or changing the connection point. Use a connector block without a lead when two compatible tape light segments meet directly and you want a compact segment-to-segment connection.

Linear lighting connectors use snap-fit blocks that help installers join tape light segments, extend runs, or change directions without stripping or soldering wires. Available lead options, wire counts, and connector styles support different lighting configurations, while outdoor versions help maintain the tape light’s IP67 rating.

For indoor, dry installations, choose an IP20 connector compatible with IP54 tape light, then match the lead and wire count to the lighting type, such as fixed color, warm dimming, tunable white, RGBW, or RGBTW. For outdoor or moisture-exposed installations, use an IP67 outdoor connector with IP67 tape light, selecting a two-wire or five-wire design and a six-inch or twenty-four-inch lead based on the layout.