Three-channel linear lighting requires a 12 VDC or 24 VDC constant-voltage LED power supply rated to support the connected LED load. Use a Class 2-rated supply for surface-mounted installations, and place the control module in a listed enclosure when the installation exceeds Class 2 wattage limits.

Axxess three-channel linear lighting uses Zigbee wireless communication to connect an LED control module with a compatible smart lighting system. The three channels can manage one RGB LED tape run, one two- or three-channel CCT tuning run, or up to three independent fixed-color or warm-dimming loads, with support for scenes and custom programming in compatible systems.

When mounting three-channel linear lighting controls, plan for a 12 VDC or 24 VDC constant-voltage Class 2 LED power supply, connect the LED strip to the output, and place the compact module where wiring and service access remain practical. The module can be surface mounted and concealed, but installations that exceed the Class 2 power limit require a listed enclosure, and the control should be positioned as part of a suitable Zigbee wireless layout.

Choose RGB control for a single run of color-changing LED tape, CCT white tuning for adjustable white light using two or three channels, or separate single-channel loads when you need to control up to three independent fixed-color or warm-dimming runs. Match the control method to the LED tape and lighting effect required, then use a compatible 12 VDC or 24 VDC constant-voltage power supply.